Two people review papers and a laptop at a desk with industrial buildings beyond the windows.
Keep the reporting boundary, calculation and source evidence together.
Diagram text description

Two people discuss papers and a laptop at a desk while industrial facilities appear outside. The illustrative scene gives no readable emissions total, original source measurement or independent assurance opinion.

A credible GHG emissions report tells the reader what was counted, how the figures were calculated and which limitations affect their use. Start with the reporting entity, period, purpose and audience. Then present the organisational and source boundaries before the headline result.

  • State why the report exists and who will use it.
  • Identify the entity, reporting period and consolidation approach.
  • Describe the included sources and scope coverage, with material exclusions.
  • Link the activity records, methods and factors to the reported lines.
  • Present gross results with their review status and open limitations.

Give the reader a route from each material scope total to the source records and calculation method. The purpose and boundary govern which evidence belongs in the report; the same evidence can support different outputs only after their methods and coverage are reconciled. A report handoff should therefore carry the source index, factor versions and review decisions with the summary.

The practical example below uses a fictional internal reporting pack. Its draft figure is traceable while one source query remains unresolved. Use the approach to check whether your own pack allows a reviewer to reconstruct the result and understand what it can support.

Choose the applicable framework and programme

Choose the reporting route before deciding which output to prepare. A corporate inventory, a jurisdiction-specific facility return and a product study can draw on related data while answering different questions. Record the applicable programme or customer request, document version and reporting period for each output.

Reporting routeAudience and reporting unitPeriod and applicability limits
Corporate inventory reportManagement, customers or other intended readers; the reporting entity under its declared consolidation approach.Named inventory period and applicable accounting framework. Coverage can span several sites or countries.
US EPA GHGRP returnEPA and programme data users; the applicable US reporting source, including covered facilities and specified supplier reporting.Programme-defined annual reporting and applicability rules. Check the relevant source category and rule for the entity.
Product footprint or customer product requestThe specified buyer or study user; a defined product unit and study boundary.Named data period and intended use. Corporate totals alone do not define a product footprint.

Table 1, shown one row at a time. Every field is retained.

Row 1

Reporting route
Corporate inventory report
Audience and reporting unit
Management, customers or other intended readers; the reporting entity under its declared consolidation approach.
Period and applicability limits
Named inventory period and applicable accounting framework. Coverage can span several sites or countries.

Row 2

Reporting route
US EPA GHGRP return
Audience and reporting unit
EPA and programme data users; the applicable US reporting source, including covered facilities and specified supplier reporting.
Period and applicability limits
Programme-defined annual reporting and applicability rules. Check the relevant source category and rule for the entity.

Row 3

Reporting route
Product footprint or customer product request
Audience and reporting unit
The specified buyer or study user; a defined product unit and study boundary.
Period and applicability limits
Named data period and intended use. Corporate totals alone do not define a product footprint.

EPA’s GHGRP page explains that direct emitters report at facility level and that the programme also covers specified suppliers and other reporting sources. It states that its data does not capture every emissions source associated with a parent company. Treat a facility return and a corporate inventory as different outputs. A product result has a different unit again, even when it reuses some of the same source evidence.

Confirm applicability with the actual programme and reporting-year rules. The US programme description does not establish a Canadian obligation or a threshold for every business. If a customer requests a different boundary or reporting format, document that requirement and reconcile the output to the source register before delivery.

Describe organisational and operational boundaries

Describe how the reporting company is defined. State the consolidation approach, included entities and sites and the period each is covered. Identify significant acquisitions, disposals or operating changes and explain how the report treats them. Keep the boundary decision available with the supporting company records.

Then describe source coverage. Identify direct sources, purchased-energy generation and other indirect value-chain activities. State which categories have been assessed, where estimates are used and what remains outside the result. A corporate inventory boundary can include indirect sources beyond a factory fence, while a facility programme defines its own reporting unit and covered sources.

An inventory-coverage frame links the reporting entities and sites with direct, purchased-energy and value-chain accounts.
Name the entities, sites and source accounts covered by the report.
Diagram text description

The declared consolidation approach defines the entities and sites included in the reporting company. The report then identifies its direct sources, purchased-energy generation and other indirect value-chain sources. Document the coverage and exclusions for every account.

For example, an entity may operate two sites while purchasing materials and distribution services from other companies. The report needs to explain the treatment of both its controlled activity and the relevant indirect sources. If a newly acquired site enters the reporting boundary partway through a period, identify the chosen treatment and the evidence supporting it.

Record material exclusions and the reason for each. Explain the effect on the result or intended use where it can be assessed. If the effect is unresolved, retain that limitation and assign the evidence request. The boundary statement should let a reader see what the headline total includes without having to infer it from the company’s name.

Show methods, data and factors

Each material reported line should be reproducible from an activity record, an applicable method and a factor whose units and coverage fit the calculation. Record the source of the activity, its period and unit, and whether it is measured, supplier-specific or estimated. Keep any conversion explicit.

Trace the result through the evidence. A meter export supports a consumption quantity. The factor record explains the source, edition, geography, gas basis and stages covered. The calculation shows the multiplication and conversion into the reported unit. The reviewer record explains exceptions and the decision about how the line can be used.

Five linked records connect a source document to a reviewed reported line.
Trace a reported line through source evidence, activity, factor, calculation and review.
Diagram text description

Find the source file supporting the activity quantity and unit. Match it to the documented factor and its boundary. Reproduce the calculation, including conversions, then read the reviewer’s exceptions and decision about the reported line.

A supplier figure needs the same fit check. Confirm the product or service, boundary, time period and method it covers. If it already includes a transport or production stage, reconcile that coverage before adding another line. Keep the original supplier statement as well as the decision about its application.

EPA’s inventory-management guidance describes keeping the organisation’s data and calculation process under continuing management. Use that principle to preserve source references and factor versions with the reporting pack. A reader should be able to recover the basis of a reported number even after a factor is replaced or a supplier sends an updated file.

Present scope 1, scope 2 and scope 3 results clearly

Report Scope 1, Scope 2 and Scope 3 on their stated bases and retain gross emissions. Show the assessment coverage, material estimates and open gaps for each account. Where both electricity methods are reported, keep the figures and supporting evidence distinct.

Scope 2 methodEvidence behind the reported figureReporting treatment
Location-basedMetered or otherwise supported energy consumption and the applicable grid-average basis.Name the method, factor source and consumption coverage.
Market-basedThe same consumption with the applicable contractual evidence and factor hierarchy.Identify qualifying instruments or the applicable fallback, with limits and method-specific evidence.

Table 2, shown one row at a time. Every field is retained.

Row 1

Scope 2 method
Location-based
Evidence behind the reported figure
Metered or otherwise supported energy consumption and the applicable grid-average basis.
Reporting treatment
Name the method, factor source and consumption coverage.

Row 2

Scope 2 method
Market-based
Evidence behind the reported figure
The same consumption with the applicable contractual evidence and factor hierarchy.
Reporting treatment
Identify qualifying instruments or the applicable fallback, with limits and method-specific evidence.

Both methods refer to the energy consumed, but their factor evidence can differ. A qualifying contractual result does not change the metered kWh. GHG Protocol’s explanatory FAQ describes when dual reporting applies and the evidence hierarchy. Keep the two results separately labelled instead of adding them together or selecting one without explaining the applicable method.

Keep reductions, avoided-emissions scenarios, removals and offset claims on their own documented bases alongside the gross inventory. Explain their units, periods and supporting methods. A reader should be able to distinguish an observed change in the inventory from a modelled effect outside it or a purchased credit. That distinction matters when interpreting a target or comparing reporting years.

Explain quality, uncertainty and recalculations

Explain changes before calling a lower total an operational reduction. The amount can move because activity changed, the reporting boundary changed, a factor or method changed, or an earlier estimate was corrected. Several drivers can act in the same period.

For each material change, retain its evidence and reported effect. Lower fuel consumption belongs to the activity explanation. An added site belongs to the boundary explanation. A different grid factor belongs to the factor or method explanation. Replacing an estimated reading with an actual one belongs to the correction record. Separate these drivers so a reader can follow the trend.

Four rows distinguish changed operations, changed boundary, updated factors and corrected estimates.
Separate activity, boundary, factor and estimate changes before interpreting a trend.
Diagram text description

A result can change because activity changed, the reporting boundary changed, a factor changed, or an estimate was corrected. Identify the evidence and effect of each relevant driver before describing the year-on-year movement as operational progress.

Use the applicable recalculation policy for the base year and comparative figures. Document when a recalculation is required, which versions are affected and who approved the decision. EPA’s inventory-management guidance identifies base-year adjustments for structural and method changes as part of inventory management. The report still needs the organisation’s documented treatment of its own changes.

Discuss uncertainty where it could affect interpretation. Name the important missing records, proxies and assumptions, and explain how they constrain the result’s use. Avoid unsupported precision. Preserve the prior report and calculations when a correction is made, and state the reason and effect of the revision beside the updated figure.

Prepare the evidence pack before assurance

Fictional reporting evidence pack. Fen Reach Manufacturing is preparing a 2025 internal management report using operational control for one workshop. Draft line EL-25-v1 reports 30 t CO₂e of location-based electricity generation emissions. All values and the EX-1 factor below are invented. The line remains provisional because one month’s consumption is estimated.

Pack fieldFilled fictional record
Report and boundaryInternal 2025 workshop report, operational control. This line covers purchased electricity generation; upstream activities are outside it.
Reported figureDraft Scope 2 location-based line EL-25-v1, 30 t CO₂e. No market-based value is asserted in this record.
Activity and source index100,000 kWh in meter file M-25-v1. One month uses an estimate awaiting the supplier bill.
Factor and methodFictional EX-1, 0.30 kg CO₂e/kWh, generation-only. 100,000 × 0.30 = 30,000 kg CO₂e.
Unit conversionDivide 30,000 kg by 1,000 kg per tonne to report 30 t CO₂e. The factor already expresses CO₂e.
Uncertainty and versionEstimated month may change the quantity. Preserve v1 and record any correction in v2.
Accountable ownerFacilities manager obtains the missing bill and reconciles the meter record.
Reviewer queryDoes the supplier bill confirm the estimated month and its period? Open. Inventory reviewer holds final approval of this line.
Sign-off and limitationManagement sees the draft and open query. No assurance opinion or complete corporate total is represented by this line.

Table 3, shown one row at a time. Every field is retained.

Row 1

Pack field
Report and boundary
Filled fictional record
Internal 2025 workshop report, operational control. This line covers purchased electricity generation; upstream activities are outside it.

Row 2

Pack field
Reported figure
Filled fictional record
Draft Scope 2 location-based line EL-25-v1, 30 t CO₂e. No market-based value is asserted in this record.

Row 3

Pack field
Activity and source index
Filled fictional record
100,000 kWh in meter file M-25-v1. One month uses an estimate awaiting the supplier bill.

Row 4

Pack field
Factor and method
Filled fictional record
Fictional EX-1, 0.30 kg CO₂e/kWh, generation-only. 100,000 × 0.30 = 30,000 kg CO₂e.

Row 5

Pack field
Unit conversion
Filled fictional record
Divide 30,000 kg by 1,000 kg per tonne to report 30 t CO₂e. The factor already expresses CO₂e.

Row 6

Pack field
Uncertainty and version
Filled fictional record
Estimated month may change the quantity. Preserve v1 and record any correction in v2.

Row 7

Pack field
Accountable owner
Filled fictional record
Facilities manager obtains the missing bill and reconciles the meter record.

Row 8

Pack field
Reviewer query
Filled fictional record
Does the supplier bill confirm the estimated month and its period? Open. Inventory reviewer holds final approval of this line.

Row 9

Pack field
Sign-off and limitation
Filled fictional record
Management sees the draft and open query. No assurance opinion or complete corporate total is represented by this line.
  1. Select material or higher-risk report lines and find their source references.
  2. Trace the activity back to the evidence and reconcile the reporting period.
  3. Test units, factor fit, boundaries and the treatment of exceptions.
  4. Record corrections, remaining queries and the reviewer’s disposition before management sign-off.

Prepare the source index, calculation log, control register and version history before external assurance work. Internal review helps identify anomalies and unanswered questions. Retain the verifier’s actual engagement scope and conclusion separately when assurance is commissioned. The existence of an evidence pack alone supplies no assurance opinion.

Keep product and supplier evidence traceable

For product and supplier inputs, retain the product revision, BOM, supplier source and any reviewed change in a handoff to the corporate inventory owner. Record what the data covers and which reporting line uses it. Keep the owner responsible for the method and boundary decision visible alongside the input.

For example, a supplier’s revised component mass can change a purchased-goods estimate. Preserve the old and new BOM records, the supplier document and the review explaining the change. The corporate inventory owner then checks quantities and process coverage, updates the calculation under a new version and records the reporting effect.

Keep the product and corporate accounting objects identifiable. A product footprint has a defined unit and life-cycle scope; a corporate line relates to the entity’s activities and reporting period. Record any allocation or conversion used when evidence passes between them. This lets a reviewer reconstruct the contribution without treating the supplier file or data-management process as independent assurance of the report.

Conclusion: let the reader reconstruct the story

A useful GHG report lets the reader reconstruct both the number and its meaning. State the purpose, entity, period and boundary, then connect material source records, methods, factors and review decisions to the reported scopes. Keep uncertainty and changes visible alongside the results.

Before release, ask whether a reader can follow a selected figure to its activity evidence and reproduce the calculation. Check whether the applicable reporting route, review status and limitations remain clear when the headline is quoted elsewhere. Give unresolved material queries an owner and a stated effect on use.

Use the next cycle to improve the largest gaps and weak controls. Preserve the current version, record what changes and carry the reason into the report. That makes reporting an ongoing evidence process and gives management a clearer basis for action.