Three people examine a machined metal part and papers at an industrial workbench.
Product evidence starts by identifying the exact component and its production records.
Diagram text description

Three people review a metal housing at a workbench with papers and a laptop. Machined pieces and industrial equipment are visible around them.

The carbon footprint of a product expresses the greenhouse gas emissions attributable to a defined product over a stated life cycle boundary, usually in kilograms of carbon dioxide equivalent, or kg CO₂e, per specified unit. Start with a question the result should answer. An engineer deciding which production step to improve needs a different level of detail from a buyer evaluating two products for the same job.

A product footprint focuses on climate impact. A broader life cycle assessment can also examine impacts such as water use and effects on ecosystems. A company inventory accounts for an organisation’s activities over a reporting period. It can supply relevant energy or purchasing records, but those records need to be attributed to the product before they can support its footprint.

A useful result tells the reader what was counted, what it represents and which assumptions could change it. The example below calculates selected emissions for one packed component and then shows what the evidence file would need before anyone reused the figure. Keep the gross inventory separate from decisions about offsets or public claims.

Start with the product, unit and purpose

Define the product and the decision together. Begin with the SKU, which is the identifier used to order or track the item. Add its configuration, revision and production site. If the same SKU can come from two factories, identify whether the result represents one site or a stated mix of production. Use the period of the data to describe what the result represents.

SpecificationWhat to record
Product identitySKU, version, material configuration, manufacturing site and packaging format
Unit of analysisFor example, one packed component leaving a named factory gate
Time representedProduction period and periods of material, energy and freight data
Intended decisionInternal hotspot review, supplier data request, or another defined use
Performance referenceFunction, expected use, required performance and service life where the study depends on them

Table 1, shown one row at a time. Every field is retained.

Row 1

Specification
Product identity
What to record
SKU, version, material configuration, manufacturing site and packaging format

Row 2

Specification
Unit of analysis
What to record
For example, one packed component leaving a named factory gate

Row 3

Specification
Time represented
What to record
Production period and periods of material, energy and freight data

Row 4

Specification
Intended decision
What to record
Internal hotspot review, supplier data request, or another defined use

Row 5

Specification
Performance reference
What to record
Function, expected use, required performance and service life where the study depends on them

For a calculation of selected production stages, one packed component can be a clear declared unit. A comparison of two guards with different lifetimes needs to consider the protection they provide over the same service period, including replacements where relevant. Equal quantities of items need not deliver equivalent performance.

Attach a footprint to a named product revision, unit and intended use.
Attach a footprint to a named product revision, unit and intended use.
Diagram text description

The fictional calculation identifies AG-12 revision C, one packed guard at the factory gate. The analyst must also keep period, site, boundary, evidence quality and the approved use. A mixed product family or a shifting unit needs clarification before a single result can be reused.

Write the specification at the top of the calculation and the handoff. If the product or purpose changes, decide whether the original unit and evidence still fit before reusing the value.

Choose a life-cycle boundary you can defend

Draw the stages from material production through manufacture, delivery, use and end of life. Mark the point where the model begins and ends. A cradle-to-gate boundary extends from upstream resource extraction and production to the stated gate. A cradle-to-grave boundary extends through use and end-of-life treatment. Where a preliminary estimate covers selected activities only, name those activities explicitly.

StageWhat to define
Materials and packagingInputs, upstream production covered by their factors and treatment of losses
Inbound transportOrigin, destination, mode and the legs already included in supplier factors
Manufacturing and packingProcesses at the site, shared activities and what leaves the gate
Distribution and useRoutes, storage and assumptions about installation, maintenance or operating energy
End of lifeTreatment routes, geography and the method used for waste and recycling

Table 2, shown one row at a time. Every field is retained.

Row 1

Stage
Materials and packaging
What to define
Inputs, upstream production covered by their factors and treatment of losses

Row 2

Stage
Inbound transport
What to define
Origin, destination, mode and the legs already included in supplier factors

Row 3

Stage
Manufacturing and packing
What to define
Processes at the site, shared activities and what leaves the gate

Row 4

Stage
Distribution and use
What to define
Routes, storage and assumptions about installation, maintenance or operating energy

Row 5

Stage
End of life
What to define
Treatment routes, geography and the method used for waste and recycling

Separate a stage excluded by the declared study boundary from an activity omitted because its data are missing. The first defines the scope. The second is a gap that may affect the estimate within that scope. Record both and explain how each limits the result.

The guard example covers selected activities up to the gate.
The guard example covers selected activities up to the gate.
Diagram text description

Included activities are aluminium and carton production, inbound transport and allocated machine electricity. Facility heat and offcut treatment are omitted from the selected estimate. Outbound distribution, use and end of life are outside it. Describe the selected activities and limitations with the figure.

For a production improvement project, the team might begin with a gate-based estimate. If the resulting design change affects maintenance, use or replacement, assess those effects before claiming an improvement across the life cycle.

Gather the activity and supplier evidence

Work from the bill of materials, or BOM, for the version being made. Check that the supplier’s part number and grade match the purchased item. Ask production which inputs the BOM omits because they are consumed during manufacture or treated as shop supplies. Add packaging and track production losses so material input and finished output can be reconciled.

ActivityEvidence to obtainReview check
Material inputVersioned BOM, issue record, weighing or yield recordsMatch material grade and input mass to the product revision
Supplier productionProduct-specific factor or underlying data, site, period and boundaryCheck the unit and whether upstream inputs and transport are covered
Process energyMeter reading, site factor and production or machine logsConfirm the period and distinguish directly metered from allocated quantities
Inbound freightShipment mass, route, mode and carrier dataConfirm which transport legs the material factor includes
PackagingActual packaging specification and massInclude inserts or other pieces used for the declared packed unit

Table 3, shown one row at a time. Every field is retained.

Row 1

Activity
Material input
Evidence to obtain
Versioned BOM, issue record, weighing or yield records
Review check
Match material grade and input mass to the product revision

Row 2

Activity
Supplier production
Evidence to obtain
Product-specific factor or underlying data, site, period and boundary
Review check
Check the unit and whether upstream inputs and transport are covered

Row 3

Activity
Process energy
Evidence to obtain
Meter reading, site factor and production or machine logs
Review check
Confirm the period and distinguish directly metered from allocated quantities

Row 4

Activity
Inbound freight
Evidence to obtain
Shipment mass, route, mode and carrier data
Review check
Confirm which transport legs the material factor includes

Row 5

Activity
Packaging
Evidence to obtain
Actual packaging specification and mass
Review check
Include inserts or other pieces used for the declared packed unit

Reconcile receipts with the activity actually used. A catalogue may give finished mass while the calculation needs the quantity fed into manufacture. If 0.90 kg enters the process and 0.80 kg leaves in the finished component, investigate the 0.10 kg difference and document how the waste is treated. Using the finished mass alone can understate upstream material production.

Save the factor source, dataset or supplier reference, version, region and original unit beside the value. Preserve the original supplier response and any conversion in the evidence file. If the factor is older than the production data, record why it remains representative or what evidence should replace it.

Reconcile the item and BOM before matching source evidence to a calculation input.
Reconcile the item and BOM before matching source evidence to a calculation input.
Diagram text description

Procurement maps the order code to the actual supplier item. Engineering confirms the revision, material and packing. Request the source data for the relevant grade and site. Keep its original unit, period, source and any conversion or unresolved field with the calculation. Assign method ownership and independent review.

Calculate emissions without hiding allocation choices

Consider this fictional example. Merriford Components makes a batch of 100 AG-12 gauge guards, revision C, during a production run in 2025. The declared unit is one finished guard packed at the factory gate. The illustration includes aluminium and carton production, inbound transport for those inputs and allocated machine electricity. All quantities, factors and source references in the example are invented.

The shared machine used 60 kWh across two runs with similar loads. The guard run occupied one of four machine hours, so the allocation assigns it 15 kWh and the other run 45 kWh. The diagram shows that split. The guard batch used 15 kWh for 100 finished units, or 0.15 kWh per guard. Machine time is the proxy for electricity in this example. If loads differ materially, meter by run or find a better physical basis.

The guard run receives 15 kWh and the other run receives 45 kWh.
The guard run receives 15 kWh and the other run receives 45 kWh.
Diagram text description

The two fictional runs used 60 kWh over four hours at similar loads. Allocate one quarter, 15 kWh, to the guard run and three quarters, 45 kWh, to the other run. Divide the guard share by 100 for 0.15 kWh per packed guard before applying the electricity factor.

Included sourceActivity per packed guardHypothetical factorkg CO₂e per packed guard
Aluminium production0.90 kg input, including 0.10 kg of offcut8.00 kg CO₂e per kg7.2000
Carton production0.08 kg carton0.75 kg CO₂e per kg0.0600
Inbound truck transport0.00098 tonnes × 200 km = 0.196 tonne-km0.10 kg CO₂e per tonne-km0.0196
Machine electricity0.15 kWh allocated to one guard0.40 kg CO₂e per kWh0.0600
Total for selected activitiesSum of the four rows—7.3396

Table 4, shown one row at a time. Every field is retained.

Row 1

Included source
Aluminium production
Activity per packed guard
0.90 kg input, including 0.10 kg of offcut
Hypothetical factor
8.00 kg CO₂e per kg
kg CO₂e per packed guard
7.2000

Row 2

Included source
Carton production
Activity per packed guard
0.08 kg carton
Hypothetical factor
0.75 kg CO₂e per kg
kg CO₂e per packed guard
0.0600

Row 3

Included source
Inbound truck transport
Activity per packed guard
0.00098 tonnes × 200 km = 0.196 tonne-km
Hypothetical factor
0.10 kg CO₂e per tonne-km
kg CO₂e per packed guard
0.0196

Row 4

Included source
Machine electricity
Activity per packed guard
0.15 kWh allocated to one guard
Hypothetical factor
0.40 kg CO₂e per kWh
kg CO₂e per packed guard
0.0600

Row 5

Included source
Total for selected activities
Activity per packed guard
Sum of the four rows
Hypothetical factor
—
kg CO₂e per packed guard
7.3396

The two material factors end at their suppliers’ gates. Both inputs travel the same assumed 200 km route together, so their combined 0.98 kg is counted once in the inbound row. For each row, the factor denominator matches the activity unit. Keep the unrounded sum for review and communicate the result as about 7.34 kg CO₂e per packed guard for the selected activities.

The model leaves facility heat, offcut treatment, outbound distribution, use and end of life outside the estimate. It includes the upstream production of all 0.90 kg of aluminium and makes no recycling credit adjustment. The omissions and hypothetical factors limit it to a worked inventory calculation.

Show data quality and uncertainty beside the number

Put the evidence classification beside each input so the reviewer can see what is known. Activity measurements, supplier data and secondary factors can appear in the same row. A metered quantity can still be combined with a factor that has weak geographic or technological fit.

Evidence classExampleWhat to check
Measured activityWeighed input or electricity meter readingInstrument, scope, period and whether the data represent normal production
Supplier-specific informationA factor for the actual alloy and production siteBoundary, allocation, coverage, source version and scope of any assurance
Secondary estimateRegional aluminium dataset or average truck factorGeographic and technological fit, age, denominator and omitted stages
Unresolved inputFacility heat without a product allocationLikely significance, owner, plan to resolve and effect on permitted use

Table 5, shown one row at a time. Every field is retained.

Row 1

Evidence class
Measured activity
Example
Weighed input or electricity meter reading
What to check
Instrument, scope, period and whether the data represent normal production

Row 2

Evidence class
Supplier-specific information
Example
A factor for the actual alloy and production site
What to check
Boundary, allocation, coverage, source version and scope of any assurance

Row 3

Evidence class
Secondary estimate
Example
Regional aluminium dataset or average truck factor
What to check
Geographic and technological fit, age, denominator and omitted stages

Row 4

Evidence class
Unresolved input
Example
Facility heat without a product allocation
What to check
Likely significance, owner, plan to resolve and effect on permitted use

Test a consequential assumption. In the fictional calculation, a change of 1.00 kg CO₂e per kg in the aluminium factor would move the result by 0.90 kg CO₂e per guard, with the other inputs held fixed. That shows why the alloy route and its factor matter. This sensitivity check describes the effect of one assumption. It does not establish a statistical confidence interval or a verified range.

Changing the assumed alloy factor by 1.00 moves the selected result by 0.90 kg CO₂e per guard.
Changing the assumed alloy factor by 1.00 moves the selected result by 0.90 kg CO₂e per guard.
Diagram text description

With 0.90 kg of aluminium input, a change of 1.00 kg CO₂e per kg in the factor changes the selected result by 0.90 kg CO₂e per guard while other inputs stay fixed. It is a one-assumption sensitivity check. Check the actual alloy route, production site and period before reuse.

If better evidence could reverse the decision, keep the result provisional for that use. Name the assumption to resolve and who can obtain the supporting record.

Use the result to make a useful decision

Use a footprint first to ask where a change could matter. In the guard example, aluminium production dominates the selected estimate, so the buyer could request the actual alloy production route and the design team could examine yield. A production change needs records of material input and equivalent finished output. Compare those quantities on the same basis before attributing a lower result to the design.

Before comparing optionsCheck both results for
Equivalent functionRequired performance, expected lifetime and replacements over the same service
Matching reference unitThe same quantity of product or service, including packing if relevant
Comparable system boundaryEquivalent included stages and a treatment of material exclusions
Consistent methodsCompatible allocation, emissions factors, use assumptions and applicable product rules
Reviewable evidenceComparable data periods, representativeness and an appropriate level of review

Table 6, shown one row at a time. Every field is retained.

Row 1

Before comparing options
Equivalent function
Check both results for
Required performance, expected lifetime and replacements over the same service

Row 2

Before comparing options
Matching reference unit
Check both results for
The same quantity of product or service, including packing if relevant

Row 3

Before comparing options
Comparable system boundary
Check both results for
Equivalent included stages and a treatment of material exclusions

Row 4

Before comparing options
Consistent methods
Check both results for
Compatible allocation, emissions factors, use assumptions and applicable product rules

Row 5

Before comparing options
Reviewable evidence
Check both results for
Comparable data periods, representativeness and an appropriate level of review

The GHG Protocol’s Product Standard overview distinguishes hotspot work from product comparisons that need more specific rules. If one supplier reports material and manufacture while another includes use and disposal, a lower number alone cannot support a purchasing comparison. Ask for a stage breakdown and compatible assumptions before drawing a conclusion.

Check equivalent service and a common modelling basis before comparing numbers.
Check equivalent service and a common modelling basis before comparing numbers.
Diagram text description

Match performance, lifetime and any replacements over the same service. Use an aligned unit and set of included stages, consistent methods and reviewable data. If one result includes use and disposal while another ends at manufacture, request a stage breakdown before comparing.

For internal tracking of the same item, record which change came from the process and which came from an updated factor or allocation method. If the baseline can be recalculated consistently, keep both versions and compare the aligned results.

A practical product evidence handoff

Consider this fictional example. The analyst gives procurement and the internal reviewer the following handoff for Merriford’s guard. The record is marked provisional for internal screening. Each version retains its evidence references and review state.

Handoff fieldFilled entry
Product and unitAG-12 revision C, one packed guard at the manufacturing gate
Activity period and file2025 batch MC-117, calculation revision 1
Result and included activitiesAbout 7.34 kg CO₂e per packed guard for aluminium, carton, inbound transport and machine electricity
Evidence referencesBOM C, material issue log M-117, shared meter sheet E-117, run log H-117 and assumed factor sheet F-3
Assumptions and gapsAlloy factor is a placeholder. The machine share is allocated by hours. Freight distance and factor are assumed
ExclusionsFacility heat, offcut treatment, outbound distribution, use and end of life
Owners and next evidenceProcurement requests the alloy and plant factor. Production checks the load assumption. The inventory reviewer decides whether to revise or release
Permitted use and refreshInternal hotspot discussion. Reopen when the alloy source, BOM, site or method changes

Table 7, shown one row at a time. Every field is retained.

Row 1

Handoff field
Product and unit
Filled entry
AG-12 revision C, one packed guard at the manufacturing gate

Row 2

Handoff field
Activity period and file
Filled entry
2025 batch MC-117, calculation revision 1

Row 3

Handoff field
Result and included activities
Filled entry
About 7.34 kg CO₂e per packed guard for aluminium, carton, inbound transport and machine electricity

Row 4

Handoff field
Evidence references
Filled entry
BOM C, material issue log M-117, shared meter sheet E-117, run log H-117 and assumed factor sheet F-3

Row 5

Handoff field
Assumptions and gaps
Filled entry
Alloy factor is a placeholder. The machine share is allocated by hours. Freight distance and factor are assumed

Row 6

Handoff field
Exclusions
Filled entry
Facility heat, offcut treatment, outbound distribution, use and end of life

Row 7

Handoff field
Owners and next evidence
Filled entry
Procurement requests the alloy and plant factor. Production checks the load assumption. The inventory reviewer decides whether to revise or release

Row 8

Handoff field
Permitted use and refresh
Filled entry
Internal hotspot discussion. Reopen when the alloy source, BOM, site or method changes

A buyer could use this handoff to ask for better alloy evidence or to discuss changes in yield. A public footprint or a claim that the guard outperforms a rival remains unsupported. Keep the previous result visible when a supplier sends a new factor and record which rows and limitations changed. Give the reviewer enough information to rebuild the total without asking the original analyst to interpret the spreadsheet.

Where software helps and where people decide

A tool can reduce repeat preparation when it keeps product identifiers, BOM versions and source references together. Before choosing a tool, run one product through it with a unit conversion, a shared input and a missing supplier value. Check whether the reviewer can inspect each original value and see why it was accepted or held.

Record or decisionWhat software can supportWhat the owner must decide
Product mappingMatch catalogue identifiers and track revision historyWhich configuration and site the study represents
Factors and conversionsStore units, source versions and calculation stepsWhether the factor and denominator fit the specific activity
Shared inputs and omissionsRecord allocations, exclusions and change historyWhether the allocation and boundary are defensible
Review and releaseKeep review status, comments and exportsWhat uses or claims the evidence supports

Table 8, shown one row at a time. Every field is retained.

Row 1

Record or decision
Product mapping
What software can support
Match catalogue identifiers and track revision history
What the owner must decide
Which configuration and site the study represents

Row 2

Record or decision
Factors and conversions
What software can support
Store units, source versions and calculation steps
What the owner must decide
Whether the factor and denominator fit the specific activity

Row 3

Record or decision
Shared inputs and omissions
What software can support
Record allocations, exclusions and change history
What the owner must decide
Whether the allocation and boundary are defensible

Row 4

Record or decision
Review and release
What software can support
Keep review status, comments and exports
What the owner must decide
What uses or claims the evidence supports

Test how a correction works. If procurement replaces a factor, can a reviewer recover the original file, see which products were affected and explain what changed in the reported result? If the new factor applies to only one site or grade, verify that it stays tied to that product record. A convenient import cannot establish that the supplier’s boundary or method matches yours.

Give unresolved values a status and an owner so automation does not make them appear final.

Prepare one product record for review

Begin the handoff with one catalogue line and its current manufacturing record. Procurement maps the order code to the supplier’s item. Engineering checks the revision and BOM against what is built. The analyst lists the activity and factors already available, then identifies which evidence must come from the supplier or the production team.

For example, if a purchasing code covers both a bare guard and a packed kit, split the mapping before calculating. A pack list can show which carton and inserts belong to each configuration. If the component itself changes alloy or site under the same code, keep the variants identifiable or explain how the production mix is represented. A revision field is useful only when the affected calculation refers to it.

Assign a method owner and a reviewer before the handoff leaves the team. The method owner documents the unit, boundary and calculation choices. The reviewer checks whether the records support the intended use and sends unresolved inputs to the person who can obtain them. Start with the evidence request most likely to change the decision. In the guard example, that is the factor for the actual alloy and plant, with its boundary and period.

What to check before sharing a product footprint

Read the result and its supporting file together before sharing it. Choose a level of review appropriate to the intended use, and record which use the reviewer approved.

Release checkHold the figure for that use when
Product, period and unit are explicitThe SKU combines different products or the unit is ambiguous
Included stages and exclusions are traceableA relevant stage or overlap remains unresolved
Values and allocation can be reproducedA key factor, conversion or shared-process method lacks evidence
Uncertainty and review status are visibleA material assumption could change the claim or comparison
Wording matches the approved useAn internal screening estimate would be presented as a public product footprint

Table 9, shown one row at a time. Every field is retained.

Row 1

Release check
Product, period and unit are explicit
Hold the figure for that use when
The SKU combines different products or the unit is ambiguous

Row 2

Release check
Included stages and exclusions are traceable
Hold the figure for that use when
A relevant stage or overlap remains unresolved

Row 3

Release check
Values and allocation can be reproduced
Hold the figure for that use when
A key factor, conversion or shared-process method lacks evidence

Row 4

Release check
Uncertainty and review status are visible
Hold the figure for that use when
A material assumption could change the claim or comparison

Row 5

Release check
Wording matches the approved use
Hold the figure for that use when
An internal screening estimate would be presented as a public product footprint

The fictional AG-12 result is provisional for internal screening.
The fictional AG-12 result is provisional for internal screening.
Diagram text description

For AG-12 revision C retain the 2025 batch, calculation version, declared unit and boundary, BOM and activity, factor assumptions, exclusions, owner and refresh trigger. Software tracks mapping and versions; the reviewer judges scope, factor fit and permitted use. Request the actual alloy factor before considering wider use, and keep offsets separate.

Send the next evidence request

Keep offset transactions separate from the gross inventory and from the company’s reporting record. For Merriford, the immediate step is to request the matching alloy factor and repeat the review with the documented exclusions in view. Send the figure with the product unit and boundary if it is ready for its intended use. Otherwise share the outstanding evidence request and the date for a new decision.