A person writes on documents at a worktable in a manufacturing setting.
Keep the activity records and factor basis beside the calculation.
Diagram text description

A person reviews papers at a worktable beside a bottle, with factory machinery behind them. The illustrative image shows no legible emissions number, source measurement or verified site inventory.

The basic carbon emissions formula is emissions = activity data × emission factor. To use it, define what activity you are counting, choose a factor with the matching denominator and record the period and boundary. Convert the final emissions mass to the unit you intend to report.

  1. Set the boundary. Name the organisation, site, source or product and the included activities.
  2. Find the activity. Record the quantity, unit, period and original evidence.
  3. Select the factor. Save its identity, version and documented coverage.
  4. Check the units. Make each conversion explicit and confirm the gas basis.
  5. Review the line. Resolve missing inputs and duplication before accepting the total.

Give a colleague the boundary statement, activity evidence, factor version, unit conversions and reviewer decision with the number. They should be able to follow that chain from the source record to the reported emissions. If a factor or quantity changes, keep the old version and record what changed in the recalculation.

A correct multiplication answers only the line you have defined. The worked example below calculates two workshop sources and provides a control record you can reuse. The result is a partial inventory for those sources; additional material sources need their own evidence and calculation.

The core carbon emissions formula

In an activity-based estimate, the factor expresses emissions per unit of the activity you can document. Multiply litres by a factor per litre, kilowatt-hours by a factor per kilowatt-hour, or an appropriate mass-distance measure by its corresponding factor. The activity unit cancels and leaves an emissions mass.

For example, kWh × kg CO₂e per kWh leaves kg CO₂e. Divide that result by 1,000 kg per tonne to report tonnes of CO₂e. Keep both steps visible. If the factor is already expressed per megawatt-hour, convert the activity or the factor denominator before multiplying. A similar-looking energy unit can change the answer by a factor of a thousand.

Kilowatt-hours multiplied by kilograms of carbon dioxide equivalent per kilowatt-hour leaves kilograms, then divides by one thousand.
Matching activity units cancel. Convert the resulting kilograms to tonnes once.
Diagram text description

Multiply activity in kilowatt-hours by a factor in kilograms of carbon dioxide equivalent per kilowatt-hour. The activity unit cancels, leaving kilograms of carbon dioxide equivalent. Divide those kilograms by one thousand to report tonnes. A factor already expressed in carbon dioxide equivalent needs no extra warming-potential multiplier.

Check what the numerator represents. A factor in kg CO₂e per activity unit already expresses its included gases on a carbon dioxide equivalent basis. Applying a second global-warming-potential multiplier to that combined result would repeat the conversion. If you instead calculate separate masses of individual gases, multiply each gas mass by its applicable GWP and sum compatible CO₂e results. State the selected assessment basis and time horizon.

The GHG Protocol calculation-tools FAQ explains how factors relate emissions to activity and why source conditions matter. Its tools and guidance can support method selection. The arithmetic still requires a matching activity record, factor scope and reporting basis for the line you are preparing.

Choose activity data that matches the source

Select the activity that describes the emissions source and method. Fuel quantity can support a combustion estimate. Metered electricity supports an energy calculation. Distance can support a transport estimate when the mode, vehicle or cargo basis matches the factor. Spend can support a screening method when its price basis and limitations fit the purpose.

  • Quantity and unit, including any conversion from the original measurement.
  • Period and site, source or product revision.
  • Evidence reference, such as a bill, meter export, invoice or log.
  • Exception, estimated portion and the reason for using it.
  • Named preparer and reviewer.

For a fictional activity record, a workshop meter file shows 120,000 kWh for its stated 2025 reporting period at site W-01. Record the file and meter identifier beside the quantity and unit. Note that the file includes an estimated closing reading, identify who will obtain the actual reading, and assign the inventory reviewer to reconcile it. That creates a usable record even while a specific uncertainty remains open.

Reconcile overlapping evidence before calculation. An annual electricity bill and twelve monthly meter exports may describe the same consumption. Decide which record is authoritative and use the other as a check. Where the periods differ, reconcile the opening and closing readings or document the estimate. Keep the difference visible so it cannot quietly enter the total twice.

Match the emission factor to place, time and unit

A factor needs to fit the activity’s location, period, technology, unit and boundary. Save the publisher or supplier, document or table, row identity, version and underlying data period where available. The GHG Protocol FAQ notes that processes and fuel composition can vary by region and time, which helps explain why a suitable source-specific value may differ from a default.

Compare the activity and factor records field by field. Does the factor cover the relevant site or region and reporting period? Does its technology or fuel description fit the source? Is its denominator the unit you measured? Does the numerator describe the gases and energy stages required by your method? Mark any proxy and state how it could affect the decision.

Activity and factor records compare place, period, technology, units and boundary.
Match the factor’s coverage to the activity before multiplying.
Diagram text description

Identify the place and period, technology, activity unit and intended boundary in the activity record. Compare those fields with the factor’s documented coverage, including energy and gas basis. Resolve a mismatch or record the justified proxy and its limit.

For electricity, identify whether the requested calculation uses generation emissions or a wider life-cycle boundary and which accounting method applies. For fuel, check the fuel grade and energy basis. A factor for fuel input and one for useful heat output cannot be swapped without the necessary efficiency relationship.

A smaller coefficient is not a selection rule. Choose the supported match, preserve the source notes and give a reviewer the reason for that choice. If you cannot establish the coverage of a factor, request the source documentation before treating the line as complete.

Worked calculation and control table

Fictional worked example. Briar Quay Workshop is preparing a partial 2025 inventory under an operational-control approach. It purchases 120,000 kWh of electricity and burns 8,000 litres of diesel in controlled equipment. The factors below are invented teaching values, version EX-1. Electricity represents generation only for this example; diesel represents direct combustion. Both factors are already in CO₂e on the same assumed gas-conversion basis.

SourceActivity and factorCalculationResult
Purchased electricity120,000 kWh × 0.20 kg CO₂e/kWh24,000 kg CO₂e ÷ 1,00024 t CO₂e
Controlled-equipment diesel8,000 L × 2.5 kg CO₂e/L20,000 kg CO₂e ÷ 1,00020 t CO₂e
Two-source totalCompatible period and emissions units24 + 2044 t CO₂e

Table 1, shown one row at a time. Every field is retained.

Row 1

Source
Purchased electricity
Activity and factor
120,000 kWh × 0.20 kg CO₂e/kWh
Calculation
24,000 kg CO₂e ÷ 1,000
Result
24 t CO₂e

Row 2

Source
Controlled-equipment diesel
Activity and factor
8,000 L × 2.5 kg CO₂e/L
Calculation
20,000 kg CO₂e ÷ 1,000
Result
20 t CO₂e

Row 3

Source
Two-source total
Activity and factor
Compatible period and emissions units
Calculation
24 + 20
Result
44 t CO₂e

No additional GWP multiplication applies because the fictional factors already report CO₂e. A gas-specific calculation would instead convert each individual gas using the selected GWP basis before aggregation. The 44 t total includes only these two source lines. It excludes upstream fuel and electricity activities and any other workshop sources. The inventory owner must assess those separately.

Electricity contributes twenty-four tonnes and diesel twenty tonnes of carbon dioxide equivalent, totalling forty-four.
The two fictional lines add to 44 t CO₂e within the stated partial inventory.
Diagram text description

In the fictional workshop, one hundred and twenty thousand kilowatt-hours times 0.20 kilograms of carbon dioxide equivalent per kilowatt-hour gives twenty-four tonnes. Eight thousand litres times 2.5 kilograms of carbon dioxide equivalent per litre gives twenty tonnes. These two compatible line results sum to forty-four tonnes for the limited example.

Acceptance caseInput or testExpected result
NormalUse the stated quantities and EX-1 factors.24 t electricity, 20 t diesel and 44 t total.
Unit mismatchPut 120 MWh into a kWh-only field.Reject the unit. Explicitly convert 120 MWh to 120,000 kWh, then obtain 24 t.
Missing inputLeave diesel litres blank.Mark the total incomplete. Keep 24 t as a known electricity subtotal.
Double conversionApply a GWP multiplier after either CO₂e factor.Reject the second gas conversion. Use the factor’s documented gas basis once.

Table 2, shown one row at a time. Every field is retained.

Row 1

Acceptance case
Normal
Input or test
Use the stated quantities and EX-1 factors.
Expected result
24 t electricity, 20 t diesel and 44 t total.

Row 2

Acceptance case
Unit mismatch
Input or test
Put 120 MWh into a kWh-only field.
Expected result
Reject the unit. Explicitly convert 120 MWh to 120,000 kWh, then obtain 24 t.

Row 3

Acceptance case
Missing input
Input or test
Leave diesel litres blank.
Expected result
Mark the total incomplete. Keep 24 t as a known electricity subtotal.

Row 4

Acceptance case
Double conversion
Input or test
Apply a GWP multiplier after either CO₂e factor.
Expected result
Reject the second gas conversion. Use the factor’s documented gas basis once.

Store the unit with every quantity. A bare value of 120 cannot reveal whether the preparer intended MWh or kWh. Validate the declared unit, make conversions visible and compare the resulting activity against its source record before accepting the total.

Avoid the calculation errors that change the answer

Treat a failed check as a reason to pause the affected line. A plausible total can still contain the wrong unit, a source outside the selected boundary, repeated gas conversion or overlapping activity. Make those checks part of the calculation before aggregation.

Check units first, then the boundary, gas basis and duplicate activity. The original record and the factor denominator should reconcile after an explicit conversion. The activity must belong to the source and period you have selected. A CO₂e factor should be used once on its stated basis. A bill, meter export and supplier total need reconciliation if they describe the same consumption.

A checks-pass decision leads to approving a line or holding it for correction.
Resolve unit, boundary, gas-basis and duplicate-activity problems before approving the total.
Diagram text description

Confirm matching units, the stated boundary, the factor’s greenhouse gas basis and that the activity has not already been counted. If all checks pass, approve the line for its named use. If a material check fails, hold the line and resolve it before including it in an approved total.

In the workshop example, adding an annual electricity bill on top of the complete meter record would double count the energy. Changing from kWh to MWh without changing or converting the denominator would alter the estimate by a thousand. A total that passes one check can still fail another.

If a correction is needed, preserve the earlier calculation and its issue. Make the change in a new version, record the reason and let the reviewer see its effect. A new factor edition can also require a review of applicability. Keep the issued version with its original factor identity so a later recalculation remains traceable.

Keep product inputs connected to the calculation

For a product calculation, connect the SKU and configuration revision to the BOM revision, supplier documents and factor records. Keep the component masses, included processes and allocation rules with the selected boundary. Save the calculation version and reviewer decision so the evidence trail reaches from the physical product to the reported result.

For example, a revised housing BOM may change a metal mass while a supplier document identifies the source of that mass. The factor record must state what material and processes it covers and the unit it uses. The resulting product estimate should point back to those revisions and record which assumptions a reviewer accepted. If the factor ends at a different production stage from the requested study, identify the gap before calculating a complete result.

Keep estimates visible alongside measured quantities. A packaging allowance, assumed process yield or shared energy allocation should carry its source and revision trigger. These records make a later update practical when the supplier provides better data. The quality of the outcome still depends on the chosen accounting method, evidence and review.

From one result to a controlled inventory

After each line passes its checks, classify it under the selected inventory approach and aggregate compatible results. Retain source-level rows so the reader can trace a reported subtotal back to its activities and factors. The following fictional control record can be copied and extended.

Control fieldFilled example and reusable prompt
Line identityW-01-EL-2025-v1. [Source, site and revision]
Activity evidence120,000 kWh, 2025 meter export for W-01. Closing-reading estimate open. [File, quantity, unit, period]
Factor identityFictional EX-1 electricity, 0.20 kg CO₂e/kWh. [Publisher, table, row, version and applicability]
Conversion and gas basiskWh cancels kWh; 24,000 kg divided by 1,000 gives 24 t. Already CO₂e, no second GWP. [Exact conversion and basis]
Boundary and classificationPurchased generation-only electricity, operational-control example, Scope 2 line. [Included stages and scope]
Owner and reviewerFacilities owner obtains actual closing reading; inventory reviewer checks the reconciliation. [Names and decision]
Limits and change recordPartial inventory, invented factor, estimated reading. [Open evidence, approved use, update reason and date]

Table 3, shown one row at a time. Every field is retained.

Row 1

Control field
Line identity
Filled example and reusable prompt
W-01-EL-2025-v1. [Source, site and revision]

Row 2

Control field
Activity evidence
Filled example and reusable prompt
120,000 kWh, 2025 meter export for W-01. Closing-reading estimate open. [File, quantity, unit, period]

Row 3

Control field
Factor identity
Filled example and reusable prompt
Fictional EX-1 electricity, 0.20 kg CO₂e/kWh. [Publisher, table, row, version and applicability]

Row 4

Control field
Conversion and gas basis
Filled example and reusable prompt
kWh cancels kWh; 24,000 kg divided by 1,000 gives 24 t. Already CO₂e, no second GWP. [Exact conversion and basis]

Row 5

Control field
Boundary and classification
Filled example and reusable prompt
Purchased generation-only electricity, operational-control example, Scope 2 line. [Included stages and scope]

Row 6

Control field
Owner and reviewer
Filled example and reusable prompt
Facilities owner obtains actual closing reading; inventory reviewer checks the reconciliation. [Names and decision]

Row 7

Control field
Limits and change record
Filled example and reusable prompt
Partial inventory, invented factor, estimated reading. [Open evidence, approved use, update reason and date]

Check and classify the source rows before aggregation. Sum approved compatible lines into the stated scopes or subtotals, identify excluded or unresolved lines, and issue a version with its change reason. In the example, the electricity and diesel rows retain their different scope classifications while the two-source total is 44 t CO₂e. Preserve both rows when reporting that total so the partial boundary stays visible.

When the closing reading becomes available, update the affected activity and recalculate under a new version. Recheck the scope totals and explain the difference from the prior result. Keep any incomplete total visibly provisional.

Conclusion: make every tonne reproducible

A reproducible emissions result starts with a defined source and ends with a record another person can follow. Give the reviewer the activity evidence, factor identity, units, reporting period, boundary and calculation version. Keep the arithmetic visible and the missing information attached to the affected line.

Use the worked example as a check on a worksheet, then replace the teaching values with the evidence and factors appropriate to your own activity. A passing arithmetic test shows that the calculation behaves as expected under those inputs. The applicability and completeness checks still need their own decisions.

Prioritise large sources with weak data or assumptions that could change the outcome. Assign the next evidence request to an owner, record the limitation and preserve the issued version when a better record arrives. This lets the team improve the inventory while keeping every reported tonne traceable.