Fugitive Emissions Management Plan: From Source Register to Verified Repair
A synthetic technician in protective clothing holds an instrument beside a pipe joint. The image does not establish a gas identity, leak quantity or successful repair.
Diagram text description
A fugitive emissions management plan should make one physical finding actionable: identify its source, assign the response, preserve the repair history and establish whether a suitable follow-up check supports closeout. An annual emissions total cannot do that job on its own.
The practical challenge is the handoff. A survey report may identify a concern, maintenance may finish a task, and the inventory team may still lack either confirmation or a defensible gas quantity. Connecting those records avoids treating three different states as one completed case.
Start with the sites and sources covered, then allocate responsibilities and choose appropriate inspection methods. Use a finding template that retains the observation and its limits. Follow it into a work order and a separate confirmation decision. The fictional case below shows why a completed maintenance task can still leave a finding open. The plan framework draws on EPA inventory guidance and a sector-specific BC regulator example, while keeping their scopes distinct. It provides a management record design, not a universal inspection rule or a physical repair procedure.
Set the plan boundary and applicable rules
Define the plan's coverage in terms that operations and the inventory team can both recognise: named sites, equipment families, gases and reporting period. Use the organisation's chosen inventory boundary to decide inclusion. Ownership, lease arrangements and operational responsibility need to be understood together; the person who services equipment is not necessarily the organisation responsible for reporting its emissions.
Keep two decisions separate. The inventory boundary answers which releases enter the organisation's account. The operating requirements answer which inspections, notifications and repairs apply to a particular installation. A source excluded from one corporate inventory can still create obligations for its operator. Conversely, being in the inventory does not mean an oil-and-gas inspection rule applies to it.
- Identify the responsible legal entity and site contact, including non-operated locations.
- Identify gas or blend and equipment use; an unknown gas needs investigation, not a guessed factor.
- Identify the current jurisdictional, permit and equipment requirements, with someone responsible for checking applicability.
- State exclusions and their reasons, and how acquisitions, retirement and contractor-managed equipment enter the change process.
The BC Energy Regulator's fugitive-emissions guidance illustrates why scope matters: it addresses specified regulated wellsites and facilities, not every company with a refrigerator. Its frequencies and thresholds cannot become a universal company policy. Where legal applicability is unresolved, flag that decision for a competent specialist while keeping the physical source visible. Do not erase it from the register simply because the accounting or regulatory classification is unfinished.
Give every decision a named owner
Assign decisions, not just department names. A contractor can deliver a survey report while the finding still has no accepted maintenance owner. The handoff should end with a person accepting responsibility for the next action, not with an email being sent.
For a small programme, one person may hold more than one role. Make that overlap explicit and arrange a proportionate second-person check for decisions where a mistaken closure would matter. The proposed division below is a management design, not a claim that every regulation requires the same staffing structure.
- Operations maintains the equipment list, confirms access and operating state, and receives new findings.
- A competent surveyor or service provider documents the method, conditions and observation, including what could not be inspected.
- Maintenance accepts the work order and determines the safe engineering response through the site's procedures.
- The emissions analyst selects the accounting method and resolves activity-data gaps; this does not authorise physical repair.
- A designated reviewer checks the basis for technical closeout and challenges unsupported accounting assumptions.
Specify who acts when the ordinary owner is absent or cannot authorise the required work. The escalation route needs decision-making authority, not merely a more senior name in a distribution list. For example, a technician may confirm that access is unavailable, but only the responsible manager can arrange the access decision and resources. Separating these responsibilities makes it possible to tell whether a delay is a missing report, an unaccepted task or a genuine engineering constraint.
Build the equipment and component register
Give each physical asset a persistent identifier and, where useful, identify its components or release points beneath it. A finding is an event associated with that identity. It is not a replacement for the equipment record, and a later inspection should not overwrite the earlier event.
The register should connect the site, asset and component to the gas or blend, equipment status, responsible operator and service provider. Include charge or capacity information where relevant to the equipment and estimation method, with its source and units. Distinguish a manufacturer's nominal charge from a measured or documented quantity in service. They answer different questions and should not silently share one field.
A sensible relationship is one component with several dated events: an initial finding, an attempted intervention and a later confirmation. Each event has its own identifier but retains the parent component ID. That allows an analyst to recognise a repeat finding at the same location without assuming it is the same uninterrupted leak. It also avoids counting a component twice because two contractors use different names for it.
The outer boundary represents one component, not a reporting-year total. A finding and its linked work order are dated records within that identity. Their connection does not mean the work has passed confirmation.
Diagram text description
When equipment is moved, replaced or retired, preserve the old identity and effective date. If the new installation receives a new ID, keep a replacement relationship rather than recycling the previous one. An inspector who returns to the site should be able to distinguish the former component from its replacement. The register then supports both field action and period-specific accounting without pretending that either can be reconstructed from today's equipment list alone.
Prevent avoidable losses before inspection
Prevention belongs in the operating plan before the first survey is scheduled. Its purpose is to reduce avoidable loss and recognise conditions needing attention, not to calculate a favourable annual number after the event. Maintenance practices should follow equipment-specific engineering instructions, competent personnel and the site's safety controls.
Identify how routine servicing, equipment changes and abnormal operating observations reach the source register. A replacement component, unexplained refill or repeated service call can change what should be investigated. None alone proves an atmospheric release of a known mass. They are triggers for an appropriate technical review, not substitutes for that review.
Consider a site whose asset list is updated only during the annual emissions exercise. A replaced unit might remain on the list while the replacement is missing. Inspection coverage would then appear complete against an obsolete denominator. Linking maintenance changes to the register addresses that failure earlier, without requiring the carbon accountant to direct the maintenance team.
The plan should also say how recurring defects influence the next maintenance decision. Repeated attention at one component may justify an engineering assessment of the underlying cause, rather than a succession of administratively closed tasks. This guide does not specify how to tighten, isolate, open or repair equipment. An evidence trail is useful only when it sits alongside safe work; it does not make an intervention safe or authorise an unqualified person to perform it.
Choose a detection method and cadence
Choose a method because it can answer the source-specific question under the operating conditions, not because it produces a persuasive picture. A survey may establish evidence of a release, a screening indication or a need for further investigation. Its meaning depends on the instrument, gas, procedure and conditions.
Use a method-selection entry for each equipment family:
- State the detection question and the gases or conditions the method can address.
- State who is competent to apply it and which equipment checks or calibration records are needed.
- Record the relevant decision criterion or threshold, its units and its governing procedure where applicable.
- State planned coverage and cadence, their regulatory or risk basis, and events that trigger an additional check.
- Explain inaccessible areas and conditions that prevent a valid result, including the follow-up needed.
Optical gas imaging, instrument surveys, service-record review and operating trends have different limits. A trend may prompt investigation without locating a component. A qualitative image may support a finding without yielding a defensible annual mass. A service record may document refrigerant movement while leaving its destination unclear.
Frequency therefore cannot be selected by copying a number from an unrelated industry guide. Resolve applicable requirements first, then document the equipment and risk basis for the operating schedule. If conditions invalidate an inspection, distinguish that event from an inspection that found no indication. Otherwise a dashboard can reward failed coverage as if it were a clean result. The resulting schedule should identify what was actually examined and the next action for what was not.
Record a finding so it can be verified
A finding record should let another competent person return to the same source and understand what was observed. Preserve raw evidence separately from the interpretation of it. The reusable template below is a case record, not a gas inventory or an assertion that every finding exceeds a legal threshold.
| Field | Entry to complete |
|---|---|
| Finding and source identity | [Finding ID; site; asset ID; component or release point] |
| Observation date | [Date, time and time zone; inspector or provider] |
| Detection evidence | [Raw observation; original file or service-report reference; operating conditions] |
| Method | [Procedure and version; instrument identity; relevant calibration evidence] |
| Applicable threshold | [Criterion and units; requirement or procedure reference; not applicable with reason, if justified] |
| Interpretation and limits | [What the evidence supports; uncertainty; inaccessible areas; validity limitations] |
| Action handoff | [Work-order ID or pending assignment; accepting owner; next decision] |
| Annual gas mass | [Separate estimate reference, or not yet estimated; never infer from finding count] |
Table 1, shown one row at a time. Every field is retained.
Row 1
- Field
- Finding and source identity
- Entry to complete
- [Finding ID; site; asset ID; component or release point]
Row 2
- Field
- Observation date
- Entry to complete
- [Date, time and time zone; inspector or provider]
Row 3
- Field
- Detection evidence
- Entry to complete
- [Raw observation; original file or service-report reference; operating conditions]
Row 4
- Field
- Method
- Entry to complete
- [Procedure and version; instrument identity; relevant calibration evidence]
Row 5
- Field
- Applicable threshold
- Entry to complete
- [Criterion and units; requirement or procedure reference; not applicable with reason, if justified]
Row 6
- Field
- Interpretation and limits
- Entry to complete
- [What the evidence supports; uncertainty; inaccessible areas; validity limitations]
Row 7
- Field
- Action handoff
- Entry to complete
- [Work-order ID or pending assignment; accepting owner; next decision]
Row 8
- Field
- Annual gas mass
- Entry to complete
- [Separate estimate reference, or not yet estimated; never infer from finding count]
Use explicit states rather than ambiguous blanks. “Not recorded” means information is absent. “Not applicable” needs a reason. “Not yet estimated” says something different from zero kilograms. If a provider reports a concentration, retain the unit and context; do not relabel it as a mass rate. If no numerical threshold applies to the chosen observation, explain the qualitative criterion instead of inventing a number to fill the cell.
Preserve amendments as dated corrections with their author and reason. For example, correcting the component ID should not destroy the original survey reference. The corrected identity needs to remain traceable to the file the technician actually supplied. This is how the case survives a handover: a new owner can reproduce the basis for the finding without treating the interpretation as more precise than the underlying evidence.
Repair the source and check it again
A work order records an action process; it does not, by itself, demonstrate that the original finding has been resolved. Keep the finding ID on the work order and retain the work-order reference on the finding. Maintenance should document what was done, when and by whom under the site's competent engineering procedures. The confirmation record then addresses whether the relevant acceptance criterion was met.
The following fictional example demonstrates the handoff. Its identifiers, date and names are invented for record design. It reports no measured leak, legal repair deadline or physical repair technique.
| Case field | Fictional example entry |
|---|---|
| Finding and source | F-EX-01; site EX-A; asset EX-CHILLER; component EX-JOINT |
| Finding date and evidence | 30 October 2026; demonstration inspection-report reference EX-SURVEY; no real measurement |
| Work order and owner | WO-EX-01; maintenance coordinator A. Example accepts the task |
| Repair status | Administrative scenario: maintenance reports work completed; engineering details remain in the work order |
| Confirmation method | Planned competent reinspection against the source-specific procedure and applicable criterion |
| Confirmation result | Pending; no pass or measurement asserted |
| Unresolved reason | Reinspection access has not been arranged; coordinator owns the access decision |
| Case status and follow-up | Open awaiting confirmation; responsible manager to arrange and document the next check |
Table 2, shown one row at a time. Every field is retained.
Row 1
- Case field
- Finding and source
- Fictional example entry
- F-EX-01; site EX-A; asset EX-CHILLER; component EX-JOINT
Row 2
- Case field
- Finding date and evidence
- Fictional example entry
- 30 October 2026; demonstration inspection-report reference EX-SURVEY; no real measurement
Row 3
- Case field
- Work order and owner
- Fictional example entry
- WO-EX-01; maintenance coordinator A. Example accepts the task
Row 4
- Case field
- Repair status
- Fictional example entry
- Administrative scenario: maintenance reports work completed; engineering details remain in the work order
Row 5
- Case field
- Confirmation method
- Fictional example entry
- Planned competent reinspection against the source-specific procedure and applicable criterion
Row 6
- Case field
- Confirmation result
- Fictional example entry
- Pending; no pass or measurement asserted
Row 7
- Case field
- Unresolved reason
- Fictional example entry
- Reinspection access has not been arranged; coordinator owns the access decision
Row 8
- Case field
- Case status and follow-up
- Fictional example entry
- Open awaiting confirmation; responsible manager to arrange and document the next check
The important outcome is “open”, even though the maintenance task reports completion. A later acceptable confirmation could support technical closeout; an inconclusive result or continuing indication would not. Any applicable repair and reporting times remain governed by the actual requirements, not the demonstration date.
Read the decision as whether the source-specific confirmation criterion has been met. Yes supports closing the technical finding with its evidence. No includes pending or inconclusive confirmation and keeps the reason visible. Historical emissions estimation remains separate.
Diagram text description
Keep technical closure separate from accounting completion. A successfully resolved finding can still have an uncertain historical release quantity. Equally, an analyst can finish an estimate while the physical issue remains open. Using two status fields prevents one team's progress from disguising another team's unfinished decision.
Estimate GHG mass separately from detection
Detection answers whether there is evidence of a release under the observation conditions. Quantification estimates a gas quantity over a defined period. CO2e, or carbon-dioxide equivalent, expresses climate impact using the selected gas-specific conversion basis. These are related outputs, but they are not interchangeable fields.
Select a method suited to the gas and equipment. EPA's direct-fugitive guidance for refrigeration, air conditioning, fire suppression and industrial gases distinguishes screening and material-balance approaches, among others. The appropriate choice depends on available records and the source boundary. It is not a licence to apply a refrigerant method to every methane component or to infer a year's emissions from one photograph.
Where the method uses material movements, reconcile additions, recoveries and changes in holdings or equipment rather than assuming all purchases escaped. A service invoice may include charging new equipment or replacing recovered gas. Where a valid measured rate is used, the time interval and operating assumptions need separate support; the inspection date alone does not establish when the release began.
Retain gas identity, activity units, period, method version, factor source and uncertainty with the estimate. Apply the chosen GWP basis consistently when expressing the gas mass as CO2e, including an appropriate treatment of blends. This article does not supply default leakage rates or numerical factors. Its practical boundary is to ensure the finding record points to a defensible estimate record, or clearly states that one is incomplete, without turning an unquantified observation into an asserted annual result.
Keep year-on-year data comparable
Before interpreting a year-on-year change, ask whether the organisation observed the same population in the same way. New equipment, more sensitive detection, better access and improved record retrieval can all increase reported findings or estimated emissions without proving that physical performance deteriorated.
For example, suppose one period includes only the main production area, while the next adds equipment in a previously inaccessible annex. A higher finding count in the second period cannot be attributed solely to worsening components. First identify the added coverage. Then compare the consistently covered population where a valid comparison is possible, while keeping the whole-site results visible. Neither comparison should erase the newly discovered sources.
Separate the explanation into physical changes, coverage changes and method changes. A documented repair belongs in the first category; bringing an omitted asset into the register belongs in the second. A changed factor or improved estimation method belongs in the third. Some cases involve more than one category, so the explanation should not force every difference into a single cause.
Keep the period's register snapshot and method version so a later reader can reconstruct the result. Follow the organisation's established base-year and recalculation policy when changes require historical treatment; do not quietly rewrite previous totals to make a trend look smooth. Where the evidence cannot separate causes, describe the comparison as limited. A transparent discontinuity is more informative than a precise-looking reduction percentage with no comparable basis.
Measure programme performance honestly
Programme indicators should reveal the next management decision. They should not reward activity that leaves the underlying issue unresolved. Keep a consistent definition and period for each measure, including the population it describes.
| Measure | Useful interpretation | Important limit |
|---|---|---|
| Inspection coverage | Which eligible sources received a valid check | Planned visits and invalid checks are not completed coverage |
| Outstanding case age | Which open findings need an escalation decision | A completed work order may still await confirmation |
| Repeat findings | Which components may need engineering investigation | Changed IDs or methods can distort recurrence |
| Estimate completeness | Which included sources have usable quantity evidence | Complete documentation does not eliminate uncertainty |
| Estimated gas mass or CO2e | What the selected accounting method reports | Not automatically an avoided-emissions result |
Table 3, shown one row at a time. Every field is retained.
Row 1
- Measure
- Inspection coverage
- Useful interpretation
- Which eligible sources received a valid check
- Important limit
- Planned visits and invalid checks are not completed coverage
Row 2
- Measure
- Outstanding case age
- Useful interpretation
- Which open findings need an escalation decision
- Important limit
- A completed work order may still await confirmation
Row 3
- Measure
- Repeat findings
- Useful interpretation
- Which components may need engineering investigation
- Important limit
- Changed IDs or methods can distort recurrence
Row 4
- Measure
- Estimate completeness
- Useful interpretation
- Which included sources have usable quantity evidence
- Important limit
- Complete documentation does not eliminate uncertainty
Row 5
- Measure
- Estimated gas mass or CO2e
- Useful interpretation
- What the selected accounting method reports
- Important limit
- Not automatically an avoided-emissions result
Present counts beside the relevant denominator rather than allowing a larger site to look worse simply because it has more equipment. A short list of cases awaiting a manager's decision can be more useful than a single overall completion percentage. Show inaccessible sources separately so removing difficult work from the denominator does not improve performance on paper.
Avoid claiming that every repaired finding represents a quantified saving. An avoided-emissions claim needs a supported counterfactual or baseline, a period and a valid measurement or estimation method. Even a sound operational improvement is not proof of a particular number of tonnes avoided. Use the measures to find bottlenecks, distinguish repeat defects and allocate attention; reserve climate-impact claims for evidence that actually supports them.
Escalate open and uncertain cases
An exception register should preserve the reason a case remains unresolved and the decision needed to move it forward. It is not a holding pen where difficult sources disappear from the main programme. Different kinds of exception require different responses.
- A safety or engineering constraint belongs with the site's competent technical authority; the carbon team must not direct an unsafe intervention.
- An inaccessible source needs an access decision and an accountable follow-up owner, not a “no leak” result.
- A missing or invalid observation needs a valid check or a stated evidence limitation.
- A gas-identity or quantity gap needs an accounting investigation; it cannot be converted to zero by closing a maintenance ticket.
- A disputed applicability question needs specialist resolution while the underlying source and case remain visible.
Give the owner a specific next decision, and retain the reason when that decision is deferred. If an actual requirement sets a deadline, record the verified requirement and any authorised exception basis. Do not manufacture a deadline merely to make the register look complete.
Review exceptions alongside new findings and repeat defects, at a cadence proportionate to their risks and applicable obligations. Ask whether the cause is a missing resource, unclear authority or an inadequate method. Each needs a different remedy. A case can be honestly incomplete and still be managed; it becomes misleading when a blank field, closed task or absent estimate hides the unfinished work.
Choose a record system without outsourcing the judgement
Choose any supporting record system by testing a real handoff, not by assuming that a carbon-data product operates a leak-management programme. The useful question is whether the proposed tool can preserve stable source identity, connect the finding to its documents and work order, and distinguish technical confirmation from accounting completion.
Use a fictional case like the one above to demonstrate the required behaviour. Change its owner, attach a corrected observation and leave confirmation pending. Can a new user distinguish the original evidence from the correction? Can they retrieve the unresolved reason without interpreting a finished maintenance task as a closed finding? Can the team export the records and references needed to continue work elsewhere?
Treat those as acceptance questions, not as promised features of a named supplier. A shared spreadsheet, maintenance system and document store may already provide part of the answer, provided responsibility for their connections is clear. Conversely, adding a dashboard does not resolve missing gas identity or inaccessible equipment. Decide which records remain authoritative and how inconsistent statuses will be reconciled. The tool's job is to make the case retrievable; competent people still determine safe intervention, valid confirmation and the accounting treatment.
Start with a bounded pilot
Begin with a manageable group of sources and follow each case from persistent identity to finding, assigned action and confirmation. The pilot succeeds when another responsible person can understand the current status and the evidence behind it without guessing what a closed task means.
- Reconcile the selected equipment population and identify missing gas or component information.
- Agree who accepts findings, authorises engineering responses and judges confirmation evidence.
- Run the reusable record through both a completed case and a case that remains unresolved.
- Confirm how each case connects to its separate emissions estimate, including incomplete estimates.
Use the unresolved case to expose a weak handoff before expanding the programme. If access has not been arranged, the next improvement is an access decision, not another reporting field. If a service document cannot be tied to an asset, repair the identity connection rather than guessing its allocation.
The essential safeguard is to keep finding status, technical closeout and annual gas mass distinct. This plan governs their relationship. A source-examples guide can help identify relevant equipment families, while a separate Scope 1 calculation guide can develop the arithmetic once suitable inputs exist. Neither replaces the finding-to-retest trail.
Scope 1: direct emissions
