Transport Emissions Factors: Choose a Number That Fits the Shipment
An analyst looks down at printed sheets beside a laptop. A freight vehicle is parked outside by a warehouse. The image illustrates a records review and gives no shipment data.
Diagram text description
Start with the shipment record, then choose a transport emissions factor whose denominator and energy boundary match it. A freight record showing cargo mass and distance can support tonne-kilometres. An odometer record supports vehicle-kilometres, which describe the whole vehicle movement. A fuel invoice supports a fuel-based estimate when you can assign the fuel to the activity you are reporting. The resulting estimates can answer different questions about the same trip.
- Identify the shipment, mode, leg and activity you can substantiate.
- Match that activity unit to the factor denominator and check any conversion.
- Name the inventory boundary and the energy stages the estimate needs.
- Record the factor publisher, edition, table and assumptions in the shipment file.
- Ask an independent reviewer to confirm the fit and approve the intended use. Hold the result as provisional while any of these checks remains open.
Imagine a carrier gives you the distance for a shared truck but sends no fuel or allocation record. You can start with the cargo mass and an applicable tonne-kilometre method. The truck’s distance by itself gives you no share of the truck’s emissions. The worked example below shows where the units cancel and where the missing evidence blocks the calculation.
Set the use before selecting a factor. An internal route screen can tolerate clearly recorded proxies that a tender declaration or customer-specific disclosure may require you to resolve. Record who will use the number and whether they will compare shipments, aggregate a corporate inventory or request better carrier data.
What a transport emissions factor actually represents
A transport emissions factor is a ratio. Its numerator is a specified amount of emissions and its denominator is a specified amount of activity. For example, kg CO₂e per vehicle-kilometre assigns greenhouse gas emissions expressed as carbon dioxide equivalent to a distance travelled by a vehicle. The same numerator per tonne-kilometre instead assigns emissions to the movement of freight mass over distance.
Read the numerator as carefully as the unit below it. A carbon dioxide-only coefficient covers one gas. A carbon dioxide equivalent factor may combine contributions from carbon dioxide, methane and nitrous oxide on a stated warming-potential basis. When the publisher lists both a total and individual gas components, check whether the components are already included in the total. Adding them again would double count.
The denominator tells you which activity you can multiply, while the method tells you what the result represents. Keep the source, edition year, included gases and calculation method with the ratio. The UK Department for Energy Security and Net Zero’s 2026 methodology distinguishes tank-to-wheel operation from upstream energy in its terminology. A label that simply says kg CO₂e per kilometre leaves both the vehicle or passenger basis and the energy stages unresolved.
Read the emissions numerator and activity denominator as a single ratio. Keep the publisher and edition, included greenhouse gases, and method with the ratio. The energy boundary and activity assumptions apply to the resulting estimate.
Diagram text description
Carry the denominator and basis into every later export. If a spreadsheet stores only the numeric factor, a reviewer can easily read a truck kilometre as a cargo kilometre or combine a direct factor with a total that already includes upstream emissions.
Start with the shipment activity you can prove
Choose the activity from the underlying record. One vehicle trip can produce several activity measures. Pick the one that corresponds to the factor and fits the allocation and reporting question you are answering.
| Activity basis | Evidence to keep | Check before using it |
|---|---|---|
| Fuel volume or energy | Litres or energy by fuel and trip, from carrier or fleet records | Confirm fuel grade and units. Allocate any fuel shared across movements. |
| Vehicle-kilometres | Odometer, telematics or route log for the specific vehicle | Whole-vehicle distance supports a vehicle estimate. Document a cargo allocation if you need one shipment. |
| Passenger-kilometres | Number of passengers and the distance each travels | Use an applicable passenger factor and check the occupancy assumptions it already contains. |
| Tonne-kilometres | Metric tonnes carried and distance by freight leg | Multiply mass by the distance travelled at that mass. Reconcile the basis for shared loads. |
Table 1, shown one row at a time. Every field is retained.
Row 1
- Activity basis
- Fuel volume or energy
- Evidence to keep
- Litres or energy by fuel and trip, from carrier or fleet records
- Check before using it
- Confirm fuel grade and units. Allocate any fuel shared across movements.
Row 2
- Activity basis
- Vehicle-kilometres
- Evidence to keep
- Odometer, telematics or route log for the specific vehicle
- Check before using it
- Whole-vehicle distance supports a vehicle estimate. Document a cargo allocation if you need one shipment.
Row 3
- Activity basis
- Passenger-kilometres
- Evidence to keep
- Number of passengers and the distance each travels
- Check before using it
- Use an applicable passenger factor and check the occupancy assumptions it already contains.
Row 4
- Activity basis
- Tonne-kilometres
- Evidence to keep
- Metric tonnes carried and distance by freight leg
- Check before using it
- Multiply mass by the distance travelled at that mass. Reconcile the basis for shared loads.
For split deliveries, calculate freight activity by leg. A truck that carries 12 tonnes for 40 km and 5 tonnes for the next 60 km has 480 plus 300 tonne-kilometres on those legs. Multiplying the first load by the whole 100 km would assign freight activity after part of the cargo has been unloaded. Empty repositioning can still produce vehicle emissions. Check whether an allocation method or factor already accounts for that running.
New Zealand’s Ministry for the Environment publishes separate road freight measures for vehicles and goods. Its 2026 guide explains that vehicle rates are averages for categories of the New Zealand fleet. Record actual distance where you have it. If you use a route estimate or an average rate, save the basis and flag the effect if the route or vehicle class is uncertain.
Match the factor to the reporting boundary
Make two boundary decisions. First, establish who owns or controls the transport operation and which reporting scope or category applies. Second, identify the physical stages in the factor. The same fuel pathway can have upstream energy emissions and emissions from vehicle operation, even when those components sit on different inventory lines.
For a diesel van controlled by the reporting company, fuel combustion is normally a direct inventory line under the applicable control approach. Assess upstream fuel production separately. For freight purchased from a third-party carrier, the carrier operates the vehicle and the service may fall within the buyer’s Scope 3 inventory. Check who purchases the service and which part of the value chain it covers before assigning a category. The UK 2026 methodology explains direct emissions from controlled vehicles. New Zealand’s road freight guidance discusses indirect emissions from third-party transport and points readers to the GHG Protocol.
For fuel burned in a company-controlled vehicle, start with direct fuel combustion and identify upstream fuel emissions separately. For transport purchased from a carrier, check the applicable Scope 3 category and the factor’s included energy stages. Check the reporting boundary before combining or placing any component.
Diagram text description
The UK terminology calls fuel or energy supply well-to-tank and vehicle operation tank-to-wheel. Where the parts use the same activity denominator, boundary and gas basis, they can be combined into a well-to-wheel estimate. Check the method for the actual row you plan to use. If a carrier already provides a combined result, adding a second well-to-tank factor can duplicate that upstream component.
For electric freight, record whether the method accounts for purchased electricity, upstream energy or transmission and distribution losses and where those lines belong in your reporting. Treat warehouse or terminal activity as a separate boundary question. An energy-stage label by itself does not tell you whether handling, storage or refrigeration is included.
Check source, geography, year and method
A factor travels with its source record. Keep the exact table, row, unit and edition, plus the boundary and applicability notes that explain the number. Check the values against the underlying publication. If you only have the methodology, you can describe its approach and seek the factor row before selecting a coefficient.
- Publisher and locator. Save the issuing body, exact worksheet or table, row label and publication link.
- Edition and data period. Record the version you used, the underlying period where stated, and the shipment period separately.
- Geography. Check the fleet, fuel market, electricity system or route the publisher used to estimate the rate.
- Vehicle and load. Confirm class, fuel or powertrain, payload or loading assumptions and whether empty running is represented.
- Unit. Read the full label, including metric versus short tons, kilometres versus miles, and grams versus kilograms of emissions.
- Stages and gases. Record which energy stages and greenhouse gases the figure covers, and whether it is a component or a combined factor.
The UK’s 2026 methodology describes how some heavy goods vehicle factors per tonne-kilometre are derived from fleet-average vehicle rates and loading data. New Zealand’s 2026 guide distinguishes urban delivery and long-haul freight and notes uncertainty in national net tonne-kilometre estimates. Both facts matter if your service differs from the average. A refrigerated part-load routed through several delivery stops deserves a fit check even when it moves within the same country as the publication.
Keep a copy of the row and its notes with the calculation version. If a newer edition changes the payload assumptions, the size or direction of the factor change may matter more than the date on the front page.
Do not import an inventory factor into a shipment without checking it
For example, a national inventory coefficient per litre of diesel can estimate the emissions associated with fuel use at the boundary stated in its methodology. Multiplying it by a freight record in tonne-kilometres leaves litres in the denominator and produces an invalid unit. National coverage alone gives you no amount of fuel consumed by one shipment.
To use the fuel route, get carrier fuel consumption for the relevant movement or a justified estimate of it, then record the allocation across loads. Check that the factor covers the fuel grade, gases and energy stages the shipment calculation needs. If you only have national fuel totals, you would also need a compatible measure of freight activity and a defensible method for moving from a national average to the service you are estimating. A vehicle-class average in an official company reporting publication may fit a documented class and service better, but it still needs the right activity and geographic basis.
A shipment rate can also come from a carrier-specific model. Check how the carrier has treated partially loaded vehicles, empty running and subcontracted legs. When a rate arrives per tonne-kilometre, ask whether it includes upstream fuel production and which road, rail or sea legs it covers. When a carrier supplies a single amount per consignment, request its allocation basis before using it to benchmark another consignment.
Keep the original source classification in your record. That tells the next reviewer whether they are examining a coefficient from a national inventory, a company reporting factor, or a carrier result for a specified freight service.
A worked factor-selection example
Fictional worked example. Alder Quay Supplies purchases one shared road freight leg for 10,000 kg of packed goods over 100 km in calendar 2025. The booking and weigh ticket establish cargo mass and road distance. The carrier has supplied neither vehicle-kilometres attributable to this shipment nor a defensible allocation of whole-truck emissions. The rates below are invented for this example.
Convert 10,000 kg ÷ 1,000 kg per metric tonne = 10 t. Multiply 10 t × 100 km = 1,000 t·km. Fictional Factor A combines 80 g CO₂e per t·km from vehicle operation and 20 g CO₂e per t·km from upstream fuel on the same basis. Together they give 100 g CO₂e per t·km. Calculate 1,000 t·km × 100 g CO₂e per t·km = 100,000 g CO₂e. Divide by 1,000 g per kg to get 100 kg CO₂e for the leg. The stated energy boundary covers operation plus upstream fuel. It excludes terminal handling and storage.
Fictional Factor B is 0.85 kg CO₂e per vehicle-km for vehicle operation only. Multiplying by 1,000 t·km leaves tonne-kilometres divided by vehicle-kilometres. The activity unit fails to cancel. Multiplying B by 100 vehicle-km, if that whole-vehicle activity were confirmed, would give 85 kg CO₂e for vehicle operation over that whole movement. Assigning it to the shipment would still require an allocation and a matched upstream component.
The fictional shipment moves ten metric tonnes for one hundred kilometres, which gives one thousand tonne-kilometres. Multiplying this activity by a compatible factor per tonne-kilometre cancels the activity unit. A factor per vehicle-kilometre leaves an uncancelled unit in that multiplication. Obtain a vehicle record and a shipment allocation before using that alternative.
Diagram text description
Keep the 100 kg fictional result labeled for the selected leg and method. If the mass rises to 11 t and the same example distance and factor still fit, the revised activity would be 1,100 t·km and the estimate 110 kg CO₂e. That is a change in activity under fixed assumptions. If the higher mass changes the vehicle class, loading or route, reopen the factor decision before carrying the estimate forward.
The six-field factor provenance record
Keep a six-field factor record beside each calculation. Copy the table into your shipment file, replace the bracketed prompts with your own evidence, and record who is responsible for an open check. The example values belong to the fictional Alder Quay shipment.
| Field | What to enter | Fictional example |
|---|---|---|
| Factor identity | [ID, mode, vehicle class or service] | AQ-RD-A, shared road freight. Vehicle class to confirm with carrier. |
| Source and version | [Publisher, title, edition, table and row, saved copy] | Training example A, v1. Invented coefficient with no published row. |
| Geography | [Country, route or fleet the factor covers, and proxy limits] | Fictional route. Confirm local fleet and fuel basis before choosing a real factor. |
| Activity unit | [Exact denominator, numerator unit and conversion] | 100 g CO₂e per t·km. Convert shipment kg to metric tonnes, result g to kg. |
| Boundary | [Inventory use, energy stages, gases, exclusions] | Purchased road leg. Vehicle operation and upstream fuel. Handling and storage excluded. |
| Selection rationale | [Matching record, rejected option, owner, reviewer, open evidence and next action] | Weigh ticket and route distance support tonne-km. Vehicle allocation open. Logistics analyst requests carrier record. Inventory reviewer holds real-world use. |
Table 2, shown one row at a time. Every field is retained.
Row 1
- Field
- Factor identity
- What to enter
- [ID, mode, vehicle class or service]
- Fictional example
- AQ-RD-A, shared road freight. Vehicle class to confirm with carrier.
Row 2
- Field
- Source and version
- What to enter
- [Publisher, title, edition, table and row, saved copy]
- Fictional example
- Training example A, v1. Invented coefficient with no published row.
Row 3
- Field
- Geography
- What to enter
- [Country, route or fleet the factor covers, and proxy limits]
- Fictional example
- Fictional route. Confirm local fleet and fuel basis before choosing a real factor.
Row 4
- Field
- Activity unit
- What to enter
- [Exact denominator, numerator unit and conversion]
- Fictional example
- 100 g CO₂e per t·km. Convert shipment kg to metric tonnes, result g to kg.
Row 5
- Field
- Boundary
- What to enter
- [Inventory use, energy stages, gases, exclusions]
- Fictional example
- Purchased road leg. Vehicle operation and upstream fuel. Handling and storage excluded.
Row 6
- Field
- Selection rationale
- What to enter
- [Matching record, rejected option, owner, reviewer, open evidence and next action]
- Fictional example
- Weigh ticket and route distance support tonne-km. Vehicle allocation open. Logistics analyst requests carrier record. Inventory reviewer holds real-world use.
Attach the cargo and distance records and link any allocation or proxy assumption to the factor decision. If you used separate energy components, keep both source rows and the arithmetic used to combine them. A reviewer should be able to trace the recorded denominator into the formula and trace each component back to its original row.
For a real run, fill the owner and deadline when the gap is material. Use a status such as provisional for internal screening, ready for a named review, or approved for a specified use. The status should tell a colleague what they can do with the record while the missing evidence is being requested.
What to do when the factor is missing or stale
When the exact factor is missing, identify the gap before choosing a proxy. A known vehicle class with an uncertain payload calls for a different check from an unknown fuel type. Compare candidate rates only after aligning units, gas basis and energy stages. Log why the nearest acceptable proxy fits, which shipments it covers and which actual evidence would replace it.
Show a sensitivity range if the open choice could change a decision. For the fictional 1,000 t·km example, a matched-boundary range of 90 to 120 g CO₂e per t·km would give 90 to 120 kg CO₂e. Label the range as illustrative and hold other inputs fixed. If the result crosses a tender or customer threshold anywhere in that range, ask for the missing evidence before using it for that decision.
When a newer edition arrives, keep the issued result with factor version A. Save version B as a separate candidate and check the reason for the change. New Zealand’s 2026 freight guidance records changes from upstream fuel updates and other source updates by mode. An apparent year-to-year trend can therefore reflect a method or dataset change. Test B on the same activity and apply the organisation’s materiality and recalculation policy.
Keep the factor, inputs, approval and stated use for the issued result under version A. Log version B separately. Check what changed and test its effect on an aligned activity record. Follow the organisation’s materiality and recalculation policy and record who decided whether to issue a revision.
Diagram text description
Log the outcome even when the issued number stays in place. Record the tested effect, date, owner and reason. If the result is reissued, link the two versions and state whether shipment activity, the factor basis or both changed.
Keep shipment evidence with the result
A shipment estimate becomes easier to review when the evidence follows the result. Give the shipment and each transport leg a stable identifier. Keep the link to the cargo lines and their SKU or batch records, the supplier or carrier that provided the measurements, the factor source and version, and the calculation method. Preserve the source record for any allocation used across several shipments.
For example, a reviewer opening a shared-load estimate should be able to follow the leg identifier to the booking, confirm the actual cargo mass against the packed goods record, and find the carrier route evidence. The factor record should point to the published row or carrier method and explain the energy stages and reporting scope. If mass is allocated from a manifest, keep the allocation rule and reconcile the original totals.
The person who prepared the estimate should log the remaining evidence gaps. A named reviewer should check whether the unit, boundary and factor fit and decide what use the result can support. Keep the calculation version with that decision. The document trail makes assumptions visible and helps the next reviewer reopen the estimate when the carrier supplies a better record.
Questions to ask before releasing a result
Before releasing a result, give the reviewer the proposed wording as well as the calculation. A good spreadsheet can still be quoted against the wrong period or used as a claim about the whole supply chain when the estimate covers one leg. Ask the reviewer to reconstruct the units and check whether the statement follows from the evidence.
- Can you find the exact cargo, route and period, and reconcile split or shared loads?
- Does the equation cancel the activity unit and convert the emissions unit correctly?
- Does the result state the reporting scope, energy stages and exclusions? Check for overlap between a carrier total and any upstream component.
- Does the source record carry the factor row, version, geography and load assumptions? Can a reviewer see why it fits this use?
- Are estimates and unresolved items explicit, and has an independent reviewer decided what can be released?
Keep provisional estimates separate from released statements. If a material item remains open, use the factor record to assign the evidence request and identify the next decision. For a supported one-leg result, the release wording should identify the shipment, period and stated energy coverage. When two routes are compared, establish the same transport service and boundary for both. Give the reviewer permission to hold the statement if any of those conditions is missing.
Frequently asked factor questions
How do I calculate a tonne-kilometre? Multiply one metric tonne of cargo by one kilometre travelled to get one tonne-kilometre. Calculate each leg at its actual load when the mass changes. Check that the factor uses metric tonnes and kilometres before multiplication.
Can I use a factor from another country? Check whether a factor for the shipment’s geography and fleet is available. If you need a proxy, document the differences in vehicle class, load, fuel or electricity mix, and distance basis. Check how much they could change the decision and record the permitted use.
When do I add well-to-tank emissions? Include upstream fuel or energy where the requested boundary calls for it and the selected operation rate leaves it outside. Compare the units and gas basis. Keep the components visible, and check the notes on any combined factor before adding anything.
Should I always replace an older factor? Keep the factor used in an issued result with that calculation. Assess the new version against the activity and materiality policy, and make any restatement decision separately. If you are preparing a new estimate, record why the selected edition matches the activity period and current method.
Start with the activity you can prove, make the units cancel, and keep the factor version and boundary beside the result. That gives a reviewer a way to repeat the calculation or identify precisely which missing evidence to request.
Freight & distribution
