A desk with a notebook and model freight vehicles overlooks a container terminal.
Factor selection starts with the transport service and the activity that can be documented.
Diagram text description

A closed green notebook and model truck and rail wagon sit on a desk. Container wagons and a terminal gantry are visible through a large window.

A logistics emission factor converts an amount of activity into estimated greenhouse gas emissions. The denominator tells you which activity to use. A factor per litre goes with fuel volume, a factor per vehicle-kilometre goes with vehicle distance, and a factor per tonne-kilometre goes with cargo mass multiplied by distance. The numerator tells you what emissions the calculation produces.

Start by checking the activity you can document. Then check the transport service, vehicle or energy type, load, geography, time period and emissions boundary. Two factors with the same unit may cover different fuels or stages. A smaller value can simply leave out upstream energy or represent a different service.

This guide compares two fictional rail factors, explains why the lower one fails the fit checks and shows how to record the decision. Keep the selected factor with its exact source and the reviewer’s rationale. That record lets someone reconstruct the estimate or reassess it when a different dataset becomes available.

Separate factor selection from shipment calculation

Factor selection answers which conversion value fits the available activity. A freight footprint uses that value, along with the route, allocations and other included stages, to estimate emissions for a shipment. Agree the intended output first so the team can see what work remains after the factor is selected.

Factor fit uses source, unit and boundary. A shipment result also needs activity, route and allocation.
The factor decision selects a conversion value. The shipment calculation applies it to a defined movement.
Diagram text description

The left panel groups source, unit and boundary under factor fit. The right panel groups activity, route and allocation under shipment result. Use the selected factor with the records for the specific movement.

TaskWhat to inspectOutput
Select a factorActivity denominator, mode, energy, load, geography, time and boundaryAn exact dataset row and a reason to apply it
Calculate a legLeg activity, factor, conversions and any allocationEstimated emissions for the specified movement
Reconcile the shipmentLeg coverage, terminal or storage records, exclusions and ownershipA shipment result or a labelled subtotal with open items

Table 1, shown one row at a time. Every field is retained.

Row 1

Task
Select a factor
What to inspect
Activity denominator, mode, energy, load, geography, time and boundary
Output
An exact dataset row and a reason to apply it

Row 2

Task
Calculate a leg
What to inspect
Leg activity, factor, conversions and any allocation
Output
Estimated emissions for the specified movement

Row 3

Task
Reconcile the shipment
What to inspect
Leg coverage, terminal or storage records, exclusions and ownership
Output
A shipment result or a labelled subtotal with open items

For example, a rail factor could be suitable for line haul while leaving collection and terminal handling outside its scope. Record that decision at selection. The shipment reviewer can then see which rows remain to be calculated and which costs or services were bundled on the invoice.

Use the factor record as the bridge between the two tasks. If the carrier later reports actual energy or a different route, check the affected record before recalculating. The change might require different activity data, a different factor or both.

Start with the activity you actually know

Look at the original activity record before searching for a factor. Fuel records may identify litres for a vehicle or fleet. Dispatch logs may give kilometres travelled. A shipment file may show tonnes carried on each leg. Each denominator needs a different calculation and leaves different questions for the reviewer.

The activity card separates fuel volume, vehicle distance and tonne-kilometres from spend used for screening.
Match the factor to the recorded unit. Spend can screen a service category when physical activity is missing.
Diagram text description

Physical records can support a factor per unit of fuel, per vehicle kilometre or per tonne-kilometre, depending on the method. A separate spend record uses the financial denominator for category screening.

Activity knownExample factor denominatorWhat else to verify
Fuel consumedLitre of the specified fuelFuel type, trip or fleet coverage and energy boundary
Vehicle distanceVehicle-kilometre or vehicle-mileVehicle class, loading, empty running and which freight shares the trip
Cargo mass and distanceTonne-kilometre or short ton-mileMass and distance units, actual leg and what the factor assumes about shared load
Expenditure on freightUnit of currency in a defined price yearSector, geography, valuation, included services and suitability for screening

Table 2, shown one row at a time. Every field is retained.

Row 1

Activity known
Fuel consumed
Example factor denominator
Litre of the specified fuel
What else to verify
Fuel type, trip or fleet coverage and energy boundary

Row 2

Activity known
Vehicle distance
Example factor denominator
Vehicle-kilometre or vehicle-mile
What else to verify
Vehicle class, loading, empty running and which freight shares the trip

Row 3

Activity known
Cargo mass and distance
Example factor denominator
Tonne-kilometre or short ton-mile
What else to verify
Mass and distance units, actual leg and what the factor assumes about shared load

Row 4

Activity known
Expenditure on freight
Example factor denominator
Unit of currency in a defined price year
What else to verify
Sector, geography, valuation, included services and suitability for screening

GHG Protocol Category 4 describes fuel-based, distance-based and spend-based methods. Choose within the applicable reporting method and available evidence. In the US EPA’s 2025 factor publication, the transport table includes both vehicle-mile and short ton-mile denominators. Its notes distinguish dedicated vehicles from shared freight when explaining which basis to use. Check which row applies before converting a metric cargo record. A short ton and a metric tonne represent different masses, and miles and kilometres represent different distances. Document both conversions when changing from metric tonne-kilometres to short ton-miles.

If the carrier offers a calculated result, ask for the activity and method it represents. Save the original units and conversions beside any adjusted value. That preserves the distinction between a change in the shipment record and a change made by the analyst.

Read the factor boundary before the value

Read the boundary note before using the value. Tank-to-wheel generally describes vehicle operation. Well-to-tank concerns upstream fuel or energy supply. Well-to-wheel combines those components under the chosen method. In an electric service, confirm how the method represents generation and supply rather than treating the absence of tailpipe emissions as a zero-energy result.

Factor coverageReview question
Vehicle operationWhich gases and operating processes are included?
Upstream energyWhich fuel production, electricity generation or supply processes does the factor cover?
Combined fuel cycleIs the full operation and upstream energy contribution already included?
Other logistics activitiesAre terminals, warehouse energy or refrigeration in the factor or handled separately?

Table 3, shown one row at a time. Every field is retained.

Row 1

Factor coverage
Vehicle operation
Review question
Which gases and operating processes are included?

Row 2

Factor coverage
Upstream energy
Review question
Which fuel production, electricity generation or supply processes does the factor cover?

Row 3

Factor coverage
Combined fuel cycle
Review question
Is the full operation and upstream energy contribution already included?

Row 4

Factor coverage
Other logistics activities
Review question
Are terminals, warehouse energy or refrigeration in the factor or handled separately?

The UK government’s 2026 conversion-factor methodology describes separate upstream energy factors and different activity bases for freight. Read the instructions for the selected row, including its vehicle, loading and scope assumptions. Keep the reporting method and factor boundary distinct. An upstream-inclusive transport result may need to be separated into components for a particular inventory.

When adding results, match both the unit and the boundary. If two rows already cover the same upstream fuel supply, keep that activity once. Where the source fails to say whether a stage is included, ask the provider or leave the overlap unresolved until the record can support a decision.

Match the mode, vehicle and load context

Use the details that matter for the service. Road factors can vary by vehicle and loading context. Rail factors can reflect the traction mix and electricity supply. Ship and aircraft factors may have different vessel or service classes and allocation methods. A factor described only as “freight” gives too little information to make those matches.

ModeService traits to inspect
RoadVehicle class, fuel, payload, empty running and any temperature control
RailTraction type, electricity or diesel mix, route coverage and assumed loading
SeaVessel or service class, cargo basis, route and treatment of terminal activities
AirFreight service or belly cargo allocation, distance basis and treatment of any additional climate effects

Table 4, shown one row at a time. Every field is retained.

Row 1

Mode
Road
Service traits to inspect
Vehicle class, fuel, payload, empty running and any temperature control

Row 2

Mode
Rail
Service traits to inspect
Traction type, electricity or diesel mix, route coverage and assumed loading

Row 3

Mode
Sea
Service traits to inspect
Vessel or service class, cargo basis, route and treatment of terminal activities

Row 4

Mode
Air
Service traits to inspect
Freight service or belly cargo allocation, distance basis and treatment of any additional climate effects

Check how the source defines the denominator. A freight factor per tonne-kilometre may already reflect average vehicle loading. A factor per vehicle-kilometre requires the appropriate vehicle distance and, for shared freight, a defensible allocation. A parcel rate may bundle several activities and use a different allocation basis again.

If you cannot match every trait, identify which difference matters most. A generic average may work for screening when it is reasonably representative. For a route decision, get the carrier’s actual operating context or test a better proxy before treating the estimate as specific to that service.

Check region, year and data release

Consider this fictional example. Bracken Tools is selecting a factor for a 2025 rail movement on the invented North Vale corridor. The estimate needs the combined fuel-cycle boundary for traction. Terminal handling is tracked separately. Both candidate values, releases, locations and carrier documents are invented.

CandidateWhat the factor describesDecision for the North Vale movement
A, 0.038 kg CO₂e per tonne-kmFen Coast rail compilation, 2019 release using 2018 diesel data. Covers operation onlyReject. The route and traction differ and upstream energy is missing
B, 0.054 kg CO₂e per tonne-kmNorth Vale carrier method v3, 2026 release using 2025 corridor activity, typical shared loading and the corridor’s traction mix. Includes operation and upstream energyUse for the modelled rail movement. Keep the typical-loading assumption visible and model the terminal separately if supported

Table 5, shown one row at a time. Every field is retained.

Row 1

Candidate
A, 0.038 kg CO₂e per tonne-km
What the factor describes
Fen Coast rail compilation, 2019 release using 2018 diesel data. Covers operation only
Decision for the North Vale movement
Reject. The route and traction differ and upstream energy is missing

Row 2

Candidate
B, 0.054 kg CO₂e per tonne-km
What the factor describes
North Vale carrier method v3, 2026 release using 2025 corridor activity, typical shared loading and the corridor’s traction mix. Includes operation and upstream energy
Decision for the North Vale movement
Use for the modelled rail movement. Keep the typical-loading assumption visible and model the terminal separately if supported

The lower value fails the boundary and service checks. Adding a generic upstream factor to A would leave the mismatched traction and geography unresolved. B’s publication year follows the movement year, but its underlying data represent the movement period. The analyst records both years and keeps the version that supports the estimate.

Before relying on B for a more specific use, obtain the actual loading and traction evidence if they could change the result. When a new release appears, check whether it reflects a change in energy supply, updated data or a different calculation method. Archive the original release and document the reason before replacing the factor in a reported series.

If the decision is whether the corridor improved over time, test the two periods with a consistent method. A revision to the factor can change the apparent difference even when the rail service stayed the same. Retain a version that explains the effect of the methodological change separately from the movement itself.

Find which stages the factor already includes

Treat each boundary component as a coverage decision. A carrier can provide a combined result for vehicle operation and upstream energy. In the fictional North Vale record, that figure stops before terminal handling. The diagram shows the two energy components inside the carrier result and the terminal activity outside it.

The carrier result encloses vehicle operation and upstream energy. Terminal, storage and refrigeration are checked separately where applicable.
Check terminal, storage and refrigeration coverage before adding a separate result.
Diagram text description

Vehicle operation and upstream energy sit inside the illustrated combined fuel-cycle result. Terminal handling and storage may need separate evidence. Check whether refrigeration is already included in transport or facility data before adding it.

If the terminal is in the reporting boundary, request a handling record and an applicable factor or allocation. Add the supported result once. If another carrier document bundles terminal work into the same trip, reconcile which services are covered before adding a separate value. Keep the supplier’s wording with the decision.

Apply the same check to storage, loading equipment and refrigeration. Refrigeration can occur during vehicle travel and at a facility. Ask which periods and energy sources each result covers and, where relevant, how the method treats refrigerants. A missing coverage note leaves an open item for the reviewer.

A useful record marks each relevant component as included, excluded by the study boundary or unresolved. If the factor already covers a component, record where it appears. That prevents another analyst from adding it again when combining records.

Use secondary data without hiding uncertainty

Evidence quality depends on how closely the activity and factor represent the movement. A carrier may have measured fuel or electricity for an actual trip. Ask how the record links to the shipment and which fuel-cycle components and allocation rules it includes. A fleet average provided by the carrier still needs a check on route, service and load.

Where primary activity is missing, use a secondary factor or proxy that fits as closely as the reporting method permits. Record the source version and the basis for its use. If the factor assumes a different vehicle class or load, say which assumption differs and how it might affect the result. Keep the original carrier response and document why the proxy was chosen.

Carrier records require a method check, activity proxies a fit check, and generic fallbacks a limitations note.
Check how closely each source represents the movement.
Diagram text description

The widest bar is measured carrier activity with a disclosed method. The middle bar is a representative activity proxy whose fit must be checked. The narrowest bar is a generic fallback with its limits stated. Widths indicate increasing specificity toward the top and do not quantify uncertainty.

Test a material uncertainty before treating the estimate as stable. For instance, if two plausible load assumptions would change the priority of a route, ask for the actual load or show the range under those assumptions. If the uncertainty affects only an internal screening decision, the reviewer may allow that use while asking for a better record. Keep the use restriction with the factor so a later export cannot turn it into a route-specific claim.

Use spend-based factors for screening

A spend-based estimate uses a financial record as the activity. Multiply expenditure for a defined service category by a matching emissions factor per currency unit. Check what costs the spend includes, the factor’s sector and geography, and the currency and price year. If a conversion is needed, document the rate or adjustment and why it is appropriate.

Spend can screen purchased logistics when physical activity is unavailable. It responds to changes in prices as well as changes in the amount or type of service. A fuel surcharge can raise the spend estimate even if distance and vehicle use stay the same. Bundled storage or insurance can also change the value assigned to transport if the spend category does not separate the services.

Use the screen to identify which categories need better activity data. Ask for route, mass, mode and any usable energy record for the material movements. When you switch methods, track the change in the estimate separately from operational changes. Keep the financial calculation and the replacement rationale so the reviewer can explain why the two results differ.

Reconcile unit conversion and allocation

Consider this fictional example. Bracken Tools has 1,800 kg of cargo on a 320 km North Vale rail leg. Convert the cargo to 1.8 tonnes and multiply by the distance to get 576 tonne-km. Apply the selected hypothetical factor of 0.054 kg CO₂e per tonne-km. The calculation gives 31.104 kg CO₂e for the modelled rail movement.

The factor already expresses emissions per unit of freight activity and reflects the assumed shared loading. Do not apply a second load share. If the carrier instead gives a whole-vehicle or whole-train result, establish which cargo and distance it covers and apply the appropriate share only once. Match the allocation to the actual service and its documented method.

Fictional rail example. 1.8 tonnes over 320 kilometres gives 576 tonne-kilometres and a modelled result of 31.104 kilograms of carbon dioxide equivalent.
The fictional rail factor already reflects assumed shared loading. Apply the load share only once.
Diagram text description

The fictional cargo is 1,800 kilograms, or 1.8 tonnes. Over 320 kilometres that gives 576 tonne-kilometres. Multiplying by 0.054 kilograms of carbon dioxide equivalent per tonne-kilometre gives 31.104 kilograms of carbon dioxide equivalent for the rail leg.

Check gas units as well as activity units. EPA’s transport table lists carbon dioxide, methane and nitrous oxide in separate columns with different mass units. If working with gas-specific values, use the required warming potentials and bring the gas masses onto a common basis before summing in CO₂e. A factor already expressed as CO₂e has already made that conversion.

Retain the starting mass, distance, conversions and result with the factor. Keep rail movement separate from terminal handling in this example. Before aggregating it with another leg, confirm that the other result uses compatible gases, units and fuel-cycle coverage.

Keep a versioned factor-selection record

Give each factor decision its own record. Copy these fields for each selected factor or where an unresolved alternative could change the estimate. Link the record to the calculation so the reviewer can open the source and reconstruct the choice.

Record fieldWhat to enter
Activity and unitLeg or service, original quantity and unit, conversion and resulting activity
Factor and numeratorApplied value, gas or CO₂e unit, and warming potential basis where applicable
Denominator and loadFuel, vehicle-distance, freight activity or currency unit, with load and allocation assumptions
Service and geographyMode, vehicle or traction, fuel or energy, route and region represented
Time and source versionActivity period, data vintage, release or version, source table and row
CoverageIncluded fuel-cycle stages, facilities, storage, refrigeration and explicit exclusions or gaps
Selection and alternativesWhy the value fits, rejected option, uncertainty and permitted use
Owner and reviewAnalyst, reviewer, decision date and trigger for replacement or reassessment

Table 6, shown one row at a time. Every field is retained.

Row 1

Record field
Activity and unit
What to enter
Leg or service, original quantity and unit, conversion and resulting activity

Row 2

Record field
Factor and numerator
What to enter
Applied value, gas or CO₂e unit, and warming potential basis where applicable

Row 3

Record field
Denominator and load
What to enter
Fuel, vehicle-distance, freight activity or currency unit, with load and allocation assumptions

Row 4

Record field
Service and geography
What to enter
Mode, vehicle or traction, fuel or energy, route and region represented

Row 5

Record field
Time and source version
What to enter
Activity period, data vintage, release or version, source table and row

Row 6

Record field
Coverage
What to enter
Included fuel-cycle stages, facilities, storage, refrigeration and explicit exclusions or gaps

Row 7

Record field
Selection and alternatives
What to enter
Why the value fits, rejected option, uncertainty and permitted use

Row 8

Record field
Owner and review
What to enter
Analyst, reviewer, decision date and trigger for replacement or reassessment

The decision record pairs observed activity, service and boundary with publisher release, decision, reviewer and revision.
Keep the service fit and version history with the factor decision.
Diagram text description

The movement side records activity and units, mode and vehicle, energy, load and route, geography and boundary. The evidence side records publisher and factor release, reporting period, report version, the selection and rejection, reviewer and any later revision.

For Bracken Tools, record that B is the fictional corridor factor for the 2025 movement and A was rejected because its region, traction and energy coverage differ. Keep the activity record and both candidate descriptions. That lets the reviewer see why a higher value was used and which evidence would justify changing it.

Archive the selected release with the calculation. If a dataset is updated later, create a new decision entry and document whether the prior reporting period needs recalculation under the applicable method.

Link the selected factor to the movement and the purchased goods. Keep the shipment identifier, supplier, route, product reference and amount carried so the reviewer can tell which activities the value represents. If freight is allocated to products, preserve the product mapping and share beside the original transport record.

Test the process with one material leg. Give the reviewer the activity record, candidate factors and a completed selection record. Ask the reviewer to reconstruct the estimate, identify which stages are covered and name the missing evidence most likely to change the result. Then assign that request to the carrier, supplier or analyst who can answer it. For Bracken Tools, the next question is whether actual loading materially differs from the carrier’s typical load. Record who will compare those two figures and which calculation that comparison will affect. When the evidence changes, revisit the choice and preserve the reason for the new decision.