An unbranded truck at an industrial loading dock beside wrapped pallets and a forklift.
Connect each logistics movement with its company boundary and service evidence.
Diagram text description

The original synthetic editorial scene shows an unbranded articulated truck backed to an industrial loading dock, wrapped pallets and a forklift beside a warehouse entrance. It provides logistics context only; it cannot establish a reporting company, asset control, purchased-service status, Category 4 classification or measured emissions.

Scope 3 Category 4 upstream transportation and distribution examples are useful only when the reporting company and its relationship to the activity are clear. A truck heading toward a factory, an outward delivery and an independent warehouse can all raise Category 4 questions. Their direction or appearance alone does not settle the accounting.

Start with the company boundary, identify the purchased goods or service, and check who controls the vehicles or facilities. Then reconcile overlap with supplier and carrier records, select compatible calculation inputs and review the result. Keep classification evidence attached to the total rather than allowing the formula to decide the category.

Reporting company and service lead to control and purchase checks, then overlap and activity checks, then a reviewed Category 4 record.
Resolve the reporting relationship before calculating the category total.
Diagram text description

Identify the reporting company and the movement or service. Check asset control and the purchased-goods or purchased-service relationship, retaining relevant contract and payment evidence. Resolve overlap with supplier or carrier data, choose compatible activity and factor inputs, then review the Category 4 record. A vehicle type alone cannot determine the category.

GHG Protocol’s Category 4 guidance distinguishes transport of purchased products between tier 1 suppliers and company operations from other purchased third-party logistics services. Those services can include outbound and interfacility movements. The fictional cases below show the contractual and control evidence behind each decision, followed by a reproducible transport calculation. They illustrate the method without supplying verified customer data or operational factors.

Start with the reporting company and purchased service

Define whose inventory you are preparing. The buyer, supplier and carrier can have different reporting relationships to one physical movement. The carrier may operate the vehicle and consume its fuel; the buyer may receive purchased goods; the supplier may arrange delivery under its sales contract. Those perspectives need separate boundary assessments.

Category 4 has two relevant entry routes: transport and distribution of purchased products from tier 1 suppliers to the company’s operations in outside vehicles or facilities, and third-party transport or distribution services purchased by the reporting company. The latter includes services bought through an intermediary, outbound distribution and transfers between company facilities.

Keep the purchase order, delivery terms, service contract and payment evidence, together with the ownership/control assessment. Payment is especially useful for distinguishing a company-purchased outbound service from a customer-purchased downstream movement. A separate carrier invoice paid by the reporting company is not a prerequisite for the tier 1 inbound purchased-goods route.

For example, supplier-arranged delivery of purchased material can still enter the buyer’s Category 4 boundary. Determine which physical leg a supplier footprint covers before adding a carrier result. An embedded price or a supplier’s invoice format cannot replace the tier, route and overlap checks. Record the applicable reporting year and consolidation policy so the decision can be repeated consistently.

Five concrete examples and their boundary tests

Explicitly fictional case comparison: every company, contract and payment below is invented. Brook Manufacturing is the reporting company except in the Cedar Retail transfer row. Each result assumes the stated consolidation boundary; the changed condition shows why the evidence matters.

Fictional caseContract, payment and control evidenceInitial treatmentChanged condition and effect
Brook inbound materialPO B-41 buys resin from a tier 1 supplier; Brook pays independent carrier C-17; Brook has no vehicle controlCategory 4 for the supplier-to-Brook movementBrook instead controls and operates the diesel truck: assess its fuel in Scope 1
Brook outbound saleContract D-22 buys independent delivery of sold goods; Brook pays the carrier and controls no transport assetCategory 4 purchased outbound serviceCustomer separately purchases the onward service and Brook does not pay: assess Brook’s downstream Category 9 boundary
Brook warehouseStorage contract W-08 and invoice buy space at an independently operated facility; Brook controls no building or energy systemsCategory 4 purchased distribution serviceBrook controls the facility within its boundary: assess fuel and purchased electricity in Scope 1 and Scope 2
Cedar retailer transferCedar moves stock between its own sites using a diesel fleet inside its control boundary; internal dispatch R-14 shows no outside carriage purchaseScope 1 for controlled diesel combustion, rather than Category 4Cedar purchases the transfer from an independent carrier: Category 4 service assessment
Brook customer-arranged onward freightAfter sale, customer Orchard buys independent onward carriage; no Brook payment or asset control; customer order O-53 identifies purchaserCategory 9 assessment for Brook, outside Category 4Brook becomes purchaser of that outside service: Category 4 assessment

Table 1, shown one row at a time. Every field is retained.

Row 1

Fictional case
Brook inbound material
Contract, payment and control evidence
PO B-41 buys resin from a tier 1 supplier; Brook pays independent carrier C-17; Brook has no vehicle control
Initial treatment
Category 4 for the supplier-to-Brook movement
Changed condition and effect
Brook instead controls and operates the diesel truck: assess its fuel in Scope 1

Row 2

Fictional case
Brook outbound sale
Contract, payment and control evidence
Contract D-22 buys independent delivery of sold goods; Brook pays the carrier and controls no transport asset
Initial treatment
Category 4 purchased outbound service
Changed condition and effect
Customer separately purchases the onward service and Brook does not pay: assess Brook’s downstream Category 9 boundary

Row 3

Fictional case
Brook warehouse
Contract, payment and control evidence
Storage contract W-08 and invoice buy space at an independently operated facility; Brook controls no building or energy systems
Initial treatment
Category 4 purchased distribution service
Changed condition and effect
Brook controls the facility within its boundary: assess fuel and purchased electricity in Scope 1 and Scope 2

Row 4

Fictional case
Cedar retailer transfer
Contract, payment and control evidence
Cedar moves stock between its own sites using a diesel fleet inside its control boundary; internal dispatch R-14 shows no outside carriage purchase
Initial treatment
Scope 1 for controlled diesel combustion, rather than Category 4
Changed condition and effect
Cedar purchases the transfer from an independent carrier: Category 4 service assessment

Row 5

Fictional case
Brook customer-arranged onward freight
Contract, payment and control evidence
After sale, customer Orchard buys independent onward carriage; no Brook payment or asset control; customer order O-53 identifies purchaser
Initial treatment
Category 9 assessment for Brook, outside Category 4
Changed condition and effect
Brook becomes purchaser of that outside service: Category 4 assessment

These are five distinct evidence patterns, not five vehicle types. The retailer transfer also demonstrates the controlled-fleet exception. For an actual file, verify the contract substance, reporting entity and control policy before adopting the illustrated treatment. A missing payment record leaves a question to resolve; it does not establish either party’s responsibility.

Inbound material from supplier to factory

For purchased materials, distinguish the tier 1 supplier-to-company leg from transport farther upstream. The former falls within the Category 4 purchased-goods boundary when outside vehicles or facilities perform it. Transport between a tier 2 supplier and the tier 1 supplier is part of Category 1 purchased-goods coverage in the guidance.

Supplier footprints and carrier invoices can describe overlapping activity. Ask whether the supplier’s factor ends at its factory gate or includes delivery to your operation. Map the included route against the separately recorded carrier leg, and reconcile the overlap before adding totals.

In Brook’s fictional B-41 case, the carrier contract and invoice establish separately purchased carriage, while the material purchase order establishes the goods relationship. If the supplier instead bundles that same inbound delivery into its price, the physical tier 1-to-Brook boundary remains relevant. Do not automatically move it into Category 1 merely because the supplier arranged payment.

Retain the source factor and any reconciliation adjustment so the reviewer can trace the change. An unresolved overlap should remain visible until the process coverage is understood; a tidy category total is not a reason to count one leg twice.

Outbound delivery paid for by the seller

A seller’s purchased third-party outbound distribution can belong in Category 4. The service is upstream in the purchased-service sense even though the sold product moves outward. The official category description explicitly includes this relationship.

For Brook’s fictional D-22 delivery, the useful evidence is the carrier service contract, Brook’s purchase and payment record, the delivery identity and confirmation that the transport asset is outside Brook’s control. The sales invoice alone does not show who purchased every logistics leg.

Seller-purchased outside carriage is assessed in Category 4. Customer-purchased downstream carriage not paid for by the seller is assessed in Category 9.
For independent outbound transport, check who purchases the service.
Diagram text description

For the reporting seller, a third-party outbound distribution service it purchases is Category 4. A downstream movement of sold goods purchased by the customer and not paid for by the reporting seller is assessed under Category 9. Both paths assume vehicles and facilities outside the seller’s ownership or control; controlled transport requires a separate scope assessment.

A different movement arranged and paid for by Orchard, with no Brook payment or control, is assessed under Brook’s downstream Category 9 boundary. Keep that onward leg separate from any earlier Brook-purchased delivery. Two parties’ documents may describe consecutive services rather than the same contract.

Record the point where the service and purchaser change. Delivery terms can help locate the responsibility, but inspect the actual arrangement rather than classifying every transaction from a shorthand term. A broad statement that all outbound transport is Category 9 would lose the purchased-service distinction that decides these cases.

Third-party distribution centre

Purchased independent storage and distribution need their own activity records. A warehouse service can include energy and refrigerant emissions as well as associated transport, but those activities have different quantities and allocation methods. Separate the service lines before estimating their contributions.

Activity within the serviceRecord to requestAllocation or boundary check
Carrier vehicle energyApplicable fuel or electricity and movement recordsAllocate the relevant transport activity to the company’s goods
Warehouse electricity or fuelFacility meters, bills, period and energy sourceEstablish the company’s share of the shared storage service
Refrigerant leakageRefrigerant type, leakage quantity and applicable conversion basisMatch the equipment, period and stored-goods service; avoid assuming leakage is zero
Average storage estimateStored volume or pallets, duration and matching factorKeep the volume-time denominator and service conditions explicit

Table 2, shown one row at a time. Every field is retained.

Row 1

Activity within the service
Carrier vehicle energy
Record to request
Applicable fuel or electricity and movement records
Allocation or boundary check
Allocate the relevant transport activity to the company’s goods

Row 2

Activity within the service
Warehouse electricity or fuel
Record to request
Facility meters, bills, period and energy source
Allocation or boundary check
Establish the company’s share of the shared storage service

Row 3

Activity within the service
Refrigerant leakage
Record to request
Refrigerant type, leakage quantity and applicable conversion basis
Allocation or boundary check
Match the equipment, period and stored-goods service; avoid assuming leakage is zero

Row 4

Activity within the service
Average storage estimate
Record to request
Stored volume or pallets, duration and matching factor
Allocation or boundary check
Keep the volume-time denominator and service conditions explicit

For fictional W-08, Brook buys storage at an outside facility. The operator’s entire annual electricity total cannot be assigned to Brook without an allocation basis. Retain the full facility denominator and Brook’s corresponding share, considering occupancy, time and temperature-controlled versus ambient service where relevant.

Check whether a bundled logistics result already includes the warehouse. Adding its energy again would duplicate coverage. Conversely, a transport-only factor does not establish that storage has been included. Record any omitted activity and the reason its evidence remains unresolved.

Cases that should not be added to Category 4

Controlled fleets, supplier/carrier overlaps and unpurchased downstream movements require different checks before anything is added to Category 4. Controlled fuel and electricity belong in the company’s relevant scope assessment. A supplier footprint covering the same inbound leg creates an overlap to reconcile, not permission to add the leg again.

Keep the tier distinction precise. Transport upstream of the tier 1 supplier is included in Category 1 purchased-goods coverage; outside transport from the tier 1 supplier to company operations is within the Category 4 goods boundary. A blanket exclusion for “supplier-embedded freight” would obscure that difference.

Third-party downstream movement of sold goods not paid for by the reporting company is assessed under Category 9. Vehicle manufacture and transport of the company’s consumed fuels or energy have other category routes, so a freight-related description alone does not establish Category 4.

Use a boundary register to retain excluded or reclassified records rather than deleting them. State the physical activity, the reason for its treatment, its destination in the inventory and the evidence owner. This lets a reviewer distinguish a correctly routed activity from a missing source. An unknown control or purchase relationship should remain an open question, with its resolution tracked.

Owned fleet versus purchased transport

Apply the actual consolidation boundary to owned or controlled vehicles before considering purchased transport. For controlled diesel vehicles, direct fuel-combustion emissions enter Scope 1. Purchased electricity used by controlled electric vehicles enters Scope 2. The fact that the vehicles bring goods into the company does not turn those energy activities into Category 4.

Independent carriage purchased by the company follows the Category 4 service assessment. In Cedar’s fictional retailer transfer, an internal dispatch and controlled-fleet record support the scope decision. A new contract with an outside carrier changes the relevant evidence and can change the category treatment even if the route and cargo remain identical.

Controlled diesel fuel is assessed in Scope 1; controlled purchased electricity in Scope 2; an independent purchased carriage service in Category 4.
Apply the company boundary before assigning transport emissions.
Diagram text description

Within the reporting company’s consolidation boundary, controlled vehicle fuel combustion is assessed in Scope 1 and purchased electricity used by controlled electric vehicles in Scope 2. An independent carrier service purchased by the reporting company is assessed in Category 4. The company boundary, energy source and service contract remain necessary evidence; leased assets need their own boundary review.

Retain vehicle identity, control policy, energy source and operating records. If the transport asset is leased, determine its treatment under the company boundary rather than assuming that every lease is either controlled or an independent freight service. The guidance separately identifies upstream leased assets where applicable.

Check the reporting level as well. A subsidiary’s fleet can look external to a local purchasing team while remaining inside the consolidated reporting group. Resolve that entity relationship before importing the carrier-like invoice into a Category 4 register. The accounting follows the reporting company’s boundary and the activity evidence, not the appearance of the bill.

Select fuel, distance or spend data with confidence labels

Choose a method based on the evidence available for the included activity. Suitable carrier fuel data can support an allocated calculation; shipment mass and distance support a distance-based estimate. Spend data can support screening when physical evidence is unavailable, with its uncertainty retained.

MethodInputs and allocation evidenceConfidence and compatibility limit
Fuel-based transportRelevant fuel type and quantity, energy or refrigerant data where applicable, complete shared-load denominatorSpecific records still need correct activity coverage and allocation
Distance-based transportShipment mass or appropriate volume, each leg’s distance, mode and matching factorFactor embeds assumptions about vehicle, utilization and service; retain representativeness limits
Spend-based screeningService expenditure by type, currency and price year, applicable monetary factorLower-confidence screening; price and service mix obscure physical activity
Storage calculationSite energy/refrigerants and allocated share, or volume-time activity with an average factorSeparate storage conditions and avoid overlap with bundled provider results

Table 3, shown one row at a time. Every field is retained.

Row 1

Method
Fuel-based transport
Inputs and allocation evidence
Relevant fuel type and quantity, energy or refrigerant data where applicable, complete shared-load denominator
Confidence and compatibility limit
Specific records still need correct activity coverage and allocation

Row 2

Method
Distance-based transport
Inputs and allocation evidence
Shipment mass or appropriate volume, each leg’s distance, mode and matching factor
Confidence and compatibility limit
Factor embeds assumptions about vehicle, utilization and service; retain representativeness limits

Row 3

Method
Spend-based screening
Inputs and allocation evidence
Service expenditure by type, currency and price year, applicable monetary factor
Confidence and compatibility limit
Lower-confidence screening; price and service mix obscure physical activity

Row 4

Method
Storage calculation
Inputs and allocation evidence
Site energy/refrigerants and allocated share, or volume-time activity with an average factor
Confidence and compatibility limit
Separate storage conditions and avoid overlap with bundled provider results

Check both the factor denominator and emissions boundary. A combustion-only fuel factor and a lifecycle factor do not cover the same processes. The guidance discusses lifecycle factors for Scope 3 transport; record the actual dataset’s coverage rather than assuming a familiar unit guarantees compatibility.

Keep gaps specific: missing route distance, unknown load share and an unsuitable factor are different problems. Select an evidence request that resolves the problem affecting the result. Additional decimal places do not compensate for an unverified activity or a mismatched method.

Mass-distance calculation for a transport leg

Explicitly fictional calculation: Brook’s B-41 material uses independent road carriage on leg BR-41-L1 in June 2025. Brook buys the service and controls no vehicle. The assumed truck load is 15 tonnes, including 6 tonnes of Brook goods, all travelling the same 250 km leg. Invented coefficient R-1 version 1 is 0.12 kg CO2e/(t·km), defined here to include fuel combustion and upstream fuel production. It is not a published or verified factor.

Calculation itemFictional inputs and arithmeticResult
Whole shared load15 t × 250 km3,750 t·km
Whole-load modelled emissions3,750 t·km × 0.12 kg CO2e/(t·km)450 kg CO2e
Brook allocation6 t / complete 15 t load = 40%; 450 × 40%180 kg CO2e
Direct company-activity cross-check6 t × 250 km × 0.12 kg CO2e/(t·km)180 kg CO2e, same result

Table 4, shown one row at a time. Every field is retained.

Row 1

Calculation item
Whole shared load
Fictional inputs and arithmetic
15 t × 250 km
Result
3,750 t·km

Row 2

Calculation item
Whole-load modelled emissions
Fictional inputs and arithmetic
3,750 t·km × 0.12 kg CO2e/(t·km)
Result
450 kg CO2e

Row 3

Calculation item
Brook allocation
Fictional inputs and arithmetic
6 t / complete 15 t load = 40%; 450 × 40%
Result
180 kg CO2e

Row 4

Calculation item
Direct company-activity cross-check
Fictional inputs and arithmetic
6 t × 250 km × 0.12 kg CO2e/(t·km)
Result
180 kg CO2e, same result

The complete 15-tonne load denominator and common leg distance make the share reproducible. Brook’s direct 1,500 tonne-kilometres already represent its goods. Multiplying that direct answer by 40% again would produce an incorrect 72 kg result. Use one consistent allocation route.

Link the carrier invoice and dispatch record for BR-41-L1 to one activity. Counting each as another 180 kg contribution would create a false 360 kg total. Also reject a vehicle-kilometre coefficient applied to 1,500 tonne-kilometres: the denominator describes a different activity. Confirm packaging and handling-unit treatment in the mass definition for real use.

The 180 kg figure is an invented road-leg result only. Warehouse service, other legs and refrigerants are not calculated here. No additional GWP is applied to the already-CO2e coefficient. Reproduction requires the mass/load manifest, distance basis, service and control evidence, exact factor version and scope, allocation rule and overlap disposition. Spend screening remains a separate, lower-confidence route, never an extra contribution for the same leg.

Spend screening when physical data is missing

Use spend screening when the relevant fuel or mass-distance evidence cannot be obtained, and label the result accordingly. Record the transport service type, amount, currency, price year, geographic basis and monetary factor version. Check whether the amount includes taxes, bundled storage or unrelated services before applying the factor’s specified basis.

A spend factor estimates emissions per unit of economic value. It does not reveal the actual route, vehicle load or fuel consumed. A higher freight price can increase the estimate without any physical increase in transport activity; changes in rates or service mix can also distort comparisons.

Keep screening uncertainty explicit and prioritize better evidence for material sources. If a physical calculation later replaces the screen, retain the earlier estimate and explain the method change. Do not add both estimates for the same service.

For BR-41-L1, the fictional mass-distance record already supplies the teaching result. An invoice amount is useful purchase evidence, but applying a spend factor to that invoice would be an alternative estimate rather than another 180 kg-like item to sum. Compare methods only after their service boundaries and allocation are understood.

Build a reviewable Category 4 register

A Category 4 register should preserve the classification decision and the calculation together. The following filled fictional record reconstructs Brook’s example; it is a teaching record with operational acceptance unresolved.

Register fieldFilled fictional BR-41-L1 entry
Company and periodBrook Manufacturing; June 2025; stated company boundary
Goods and serviceTier 1 resin purchase B-41; independent road-carriage contract C-17
Control and paymentNo Brook vehicle control; Brook carrier invoice/payment reference PAY-17
Physical movementBR-41-L1; supplier dispatch point to Brook factory; assumed 250 km
Quantity and allocationBrook 6 t within complete 15 t load; all goods on same leg; 40% share
Factor and boundaryInvented R-1 version 1; 0.12 kg CO2e/(t·km); fuel combustion plus upstream fuel production
CalculationWhole load 450 kg CO2e × 40% = 180; direct Brook activity also gives 180
Overlap and exclusionsInvoice/dispatch linked once; supplier delivery-factor coverage unresolved; warehouse and other legs unquantified
Owner and reviewIllustrative Logistics Analyst owns evidence request; hold operational acceptance
Revision triggerActual manifest, route, control, supplier coverage or applicable factor evidence changes

Table 5, shown one row at a time. Every field is retained.

Row 1

Register field
Company and period
Filled fictional BR-41-L1 entry
Brook Manufacturing; June 2025; stated company boundary

Row 2

Register field
Goods and service
Filled fictional BR-41-L1 entry
Tier 1 resin purchase B-41; independent road-carriage contract C-17

Row 3

Register field
Control and payment
Filled fictional BR-41-L1 entry
No Brook vehicle control; Brook carrier invoice/payment reference PAY-17

Row 4

Register field
Physical movement
Filled fictional BR-41-L1 entry
BR-41-L1; supplier dispatch point to Brook factory; assumed 250 km

Row 5

Register field
Quantity and allocation
Filled fictional BR-41-L1 entry
Brook 6 t within complete 15 t load; all goods on same leg; 40% share

Row 6

Register field
Factor and boundary
Filled fictional BR-41-L1 entry
Invented R-1 version 1; 0.12 kg CO2e/(t·km); fuel combustion plus upstream fuel production

Row 7

Register field
Calculation
Filled fictional BR-41-L1 entry
Whole load 450 kg CO2e × 40% = 180; direct Brook activity also gives 180

Row 8

Register field
Overlap and exclusions
Filled fictional BR-41-L1 entry
Invoice/dispatch linked once; supplier delivery-factor coverage unresolved; warehouse and other legs unquantified

Row 9

Register field
Owner and review
Filled fictional BR-41-L1 entry
Illustrative Logistics Analyst owns evidence request; hold operational acceptance

Row 10

Register field
Revision trigger
Filled fictional BR-41-L1 entry
Actual manifest, route, control, supplier coverage or applicable factor evidence changes

Keep unresolved supplier delivery coverage visible even though the arithmetic is complete. A real reviewer needs to establish whether the material factor already includes this leg and document the reconciliation before accepting the category total.

Assign stable identities to warehouse services as well as transport legs. Preserve source files, original units, assumptions and version history so a later update can be explained. A changed route, corrected quantity and revised category decision are distinct reasons for a different result. The register should show which occurred and who reviewed it.

Keep product and logistics evidence connected

Organize product, supplier and shipment evidence so another person can follow the relationship between purchased goods, logistics services and the calculation. A product or bill-of-materials record can identify what moved, while contracts, control evidence and activity records establish the transport or storage treatment.

Check the actual capabilities of any proposed support. Ask how it retains category decisions, factor versions, shared-load denominators, overlap questions and reviewer dispositions. Confirm carrier connections, calculation coverage and assurance scope separately before relying on a service description.

For the next Category 4 record, begin with the reporting company and the purchased-goods or service relationship. Resolve control and overlap, use compatible activity and factors, and retain the result’s limits. The useful outcome is a reproducible, reviewed inventory entry with its unanswered questions visible. An organized evidence structure supports that work; it does not by itself establish a verified factor, completed assurance or permission to publish a claim.