What Percentage of a Product Carbon Footprint Comes From Materials and Manufacturing?
A person in a pale green overshirt handles metal enclosure parts on a light table. A circuit board, unfilled lined worksheet and calculator suggest organising component information; no readable quantities, emissions values or certification appear.
Diagram text description
There is no single defensible answer to the question “what percentage of the carbon footprint comes from the materials assembly and manufacturing”. A percentage belongs to a particular product inventory. It changes with the materials, processes, useful life and stages counted, so a number taken from a car, a factory or a national emissions chart cannot simply become your product’s production share.
For a defined product, the calculation is straightforward: add the emissions assigned to materials and assembly, divide by the total emissions within the stated product boundary, then multiply by 100. The difficult work is making those two quantities compatible. A precise-looking fraction is still misleading if its numerator covers one finished item while its denominator covers a year of factory operations.
The useful outcome is therefore a conditional result, not a universal benchmark. The worked example below keeps one fictional product’s production emissions unchanged while widening its boundary. Its share falls, but nothing has become cleaner. That distinction lets a buyer ask better questions and helps a manufacturer choose an improvement task rather than chase a more attractive percentage.
First check what the percentage is a percentage of
Start by writing the denominator in words. “Total footprint” might mean all stages from extraction through disposal, or it might mean a partial inventory ending when a component leaves its supplier. These are different totals. A factory-gate assessment does not establish what happens during the customer’s use of the final product, and it should not be described as a complete lifecycle result.
Next define the numerator. Here, materials means the specified material and component supply activities, while assembly means additional production activities at the assembling site. That convention must say where incoming transport, packaging and manufacturing services sit. A different study may group them differently. Neither convention is made comparable by attaching the same heading to it.
ISO’s product-footprint overview was consulted on 31 October 2026 (UTC). Its public abstract distinguishes full and partial product carbon footprints; it does not supply a standard production percentage. A study using a recognised method still needs its own product, scope and activity data. Reading the public overview is not the same as applying or independently verifying every requirement of the full standard.
Finally, keep the absolute quantities beside the fraction. If production remains at the same kilograms of carbon dioxide equivalent, adding an omitted use stage can lower its share without changing production at all. Ask whether the number changed because of a physical intervention, a revised estimate or a different boundary. Those explanations support different decisions.
Why sector-wide statistics cannot answer a product question
Two ratios can both describe manufacturing and still answer unrelated questions. An industry statistic divides emissions attributed to an economic sector by a national or global total. A product-stage share divides selected activities for one product by that product’s inventory. The populations, allocation choices and denominator are different, even when both outputs carry a percent sign.
Consider a purchasing team choosing between two enclosure designs. A chart about manufacturing’s contribution to a country’s emissions cannot reveal which enclosure has lower material demand, which process supplies its aluminium or how much electricity each design requires in assembly. That chart may explain why industrial decarbonisation matters, but the design decision needs evidence about the actual parts.
A corporate inventory is another possible distraction. A manufacturer’s operational emissions do not automatically include every upstream component and downstream use activity associated with a finished product. Dividing a product’s material estimate by the company’s annual total would combine incompatible scopes rather than reveal a lifecycle share.
Use a sector headline to frame a business question, not to fill a missing inventory cell. When someone offers a percentage, request its numerator, denominator, product unit and included stages. If those cannot be identified, there is not yet a product percentage to compare.
What belongs in materials and what belongs in assembly
Create a stage map before adding factors. Materials can include extraction, refining and the upstream processing needed to supply a usable material. A bought-in component may already embody several of these activities, as well as its supplier’s fabrication. Final assembly then adds the activities required to turn the supplied parts into the studied output. The exact dividing line is a declared accounting convention, not a universal property of the word “manufacturing”.
Imagine a purchased circuit board supplied with a footprint that already includes its constituent materials and board fabrication. Adding those same materials and fabrication again would count them twice. Either use the component result for its covered activities, or build an appropriately scoped component estimate from underlying inputs. Do not combine both representations of the same work.
The diagram encloses materials and processing within the supplier component scope. That component total and genuinely additional assembly inputs feed the product subtotal. There is no second contribution for the enclosed activities. The subtotal is deliberately not labelled a complete lifecycle footprint: transport, use and other relevant activities still require their own treatment.
Materials and processing lead to a component footprint inside the supplier-scope boundary. That result and separate additional assembly each feed a product subtotal. The enclosed activities are not added again outside the component result. This illustrates inclusion and combination, not a complete inventory or a physical emissions saving.
Diagram text description
Coverage matters more than the file’s title. A supplier may provide a gate-to-gate process figure that excludes its materials, or a broader component footprint that includes them. Before accepting either, identify the unit, covered processes, exclusions and allocation basis. Add only the activities missing from that boundary. A missing activity is a data gap; a different grouping is a reconciliation task.
Why another product’s percentage does not transfer to yours
A vehicle’s production share depends partly on the lifetime distance, energy source and operating assumptions in its study. A product with substantial use-phase energy can have a very different split from a passive object whose use consumes no electricity. That is a reason to examine the model, not a reason to assume that one of these categories always has a particular percentage.
Electronics add another complication: a small component can have an energy-intensive manufacturing route. Its mass alone does not establish its importance. Moving from a heavy enclosure to a lighter design could reduce one contribution while leaving an important purchased component unchanged. A broad “electronics” average would not resolve that design choice.
Even two versions of a familiar item can differ. A reusable container’s result depends on how much service it actually provides and whether its assumed cleaning and replacement patterns are achieved. A disposable alternative may use less material per item but require many more items for the same service. A per-item manufacturing fraction cannot settle that comparison.
Treat another study as a source of questions: what function was supplied, what production route was modelled, how long was it used, and what happened afterwards? Transfer the questioning method. Transfer a numerical share only when a justified comparison establishes compatible products, boundaries and assumptions.
Start with one product and one functional unit
Choose the product before choosing the factor. Fix the SKU or other product identifier, revision, size and relevant variants. A bill of materials for a previous revision is not adequate simply because the product name stayed the same. A changed casing, battery or supplier route can alter the inventory behind the percentage.
Then state the service being assessed. For an operating product, specify the function, required performance and duration. “One lamp” identifies an object; a defined amount and quality of lighting over an agreed period identifies a service. The reference flow is the amount of product and associated replacements needed to deliver that service. For a suitable intermediate-product study, a clearly justified quantity at the gate may instead be the practical unit of analysis.
Use that definition consistently. If a device requires a replacement component during the assessed service, the replacement cannot disappear from the material tally while its operating hours remain in the denominator. If two alternatives provide different performance, first resolve whether they satisfy the same task.
A useful scope statement is short enough for everyone collecting data to repeat: which revision, how much output or service, where the boundary ends, and which period or scenario applies. It becomes the common scale for materials, assembly and later stages.
Build the material and component inventory
Build the inventory around activities, not just a list of material names. For each BOM line, connect the quantity to the supplied form and production route. A generic kilogram of polymer is not automatically equivalent to a finished moulded part; a supplier component result may already include the transformation you were about to add separately.
| Inventory field | Record for the chosen product |
|---|---|
| Identity | SKU, BOM revision and component identifier |
| Quantity | Input mass or count per reference flow |
| Yield | Accepted output, scrap and rework basis |
| Route | Material grade, fabrication and supplier process |
| Evidence | Supplier record or factor source and version |
| Applicability | Geography, technology and data period |
| Coverage | Included activities, gaps and uncertainty |
Table 1, shown one row at a time. Every field is retained.
Row 1
- Inventory field
- Identity
- Record for the chosen product
- SKU, BOM revision and component identifier
Row 2
- Inventory field
- Quantity
- Record for the chosen product
- Input mass or count per reference flow
Row 3
- Inventory field
- Yield
- Record for the chosen product
- Accepted output, scrap and rework basis
Row 4
- Inventory field
- Route
- Record for the chosen product
- Material grade, fabrication and supplier process
Row 5
- Inventory field
- Evidence
- Record for the chosen product
- Supplier record or factor source and version
Row 6
- Inventory field
- Applicability
- Record for the chosen product
- Geography, technology and data period
Row 7
- Inventory field
- Coverage
- Record for the chosen product
- Included activities, gaps and uncertainty
The quantity and factor must describe compatible things. If a factor applies per kilogram of input material, multiplying it by net finished-part mass can omit the material lost in processing. If a finished-component factor already reflects its production losses, applying another generic scrap uplift may duplicate them. Ask what the factor’s unit and boundary actually represent.
Reconcile the mass balance for the relevant route: purchased inputs, accepted output and identified losses should have an explainable relationship. Do not assume that every scrap stream earns the same recycling credit, or that recycling removes all impacts associated with producing the discarded material. Where a high-impact input remains uncertain, expose the assumption and examine its effect instead of replacing it silently with a convenient average.
Assign assembly energy and process inputs
Assembly is not calculated by dividing the entire factory energy bill by whichever production quantity is easiest to find. The product needs a justified share of the processes that actually make it. Direct measurements can reduce the amount of shared input that must be allocated; they do not remove the need to define the output and account for missing activities.
- Map the production route. Identify the operations, purchased manufacturing services and relevant ancillary inputs required for the selected product, including rework where applicable.
- Measure attributable inputs where practical. Connect electricity, fuel and other activity records to equipment, process runs and the production period rather than to an unrelated annual total.
- Identify shared processes. Separate them where possible; where allocation remains necessary, select a justified relationship to the products receiving the process, not an arbitrary equal split.
- Match the allocated inputs to accepted output. Explain rejects, scrap and rework so that an input assigned to production is not lost or counted again in a second stage.
- Reconcile the result. Check that product allocations, remaining products and identified exclusions can be reconciled with the measured source total before treating the product estimate as complete.
An illustrative allocation makes the issue concrete. Suppose a shared process consumes 1,000 kWh during a period and an evidenced physical driver assigns one quarter to the studied output. That allocation is 250 kWh, not 250 kg CO2e. An appropriate electricity emission factor is still needed to estimate emissions. Scaling again to one finished item requires the compatible accepted-output quantity.
Do not read the one-quarter assumption as a recommended allocation rule. Its purpose is to show the separate steps: assign the activity, apply the factor, then express the result per reference flow. An unexplained lower allocation can shrink a footprint estimate without improving the physical process.
Calculate the share with a worked conditional example
The following inventory is entirely fictional. Assume one assembled desk light, revision A, supplying a specified lighting level for 1,000 operating hours without replacement. All emissions figures are invented, expressed in kg CO2e for that same reference flow, and used only to demonstrate arithmetic. They are not supplier factors, industry averages or a measured product result.
| Activity group | Fictional kg CO2e | In factory-gate subtotal? |
|---|---|---|
| Materials and purchased components | 45 | Yes |
| Additional assembly | 15 | Yes |
| Incoming transport | 5 | Yes |
| Distribution after the gate | 5 | No |
| Use over the stated service | 25 | No |
| End-of-life treatment | 5 | No |
| Complete lifecycle total | 100 | Gate subtotal: 65 |
Table 2, shown one row at a time. Every field is retained.
Row 1
- Activity group
- Materials and purchased components
- Fictional kg CO2e
- 45
- In factory-gate subtotal?
- Yes
Row 2
- Activity group
- Additional assembly
- Fictional kg CO2e
- 15
- In factory-gate subtotal?
- Yes
Row 3
- Activity group
- Incoming transport
- Fictional kg CO2e
- 5
- In factory-gate subtotal?
- Yes
Row 4
- Activity group
- Distribution after the gate
- Fictional kg CO2e
- 5
- In factory-gate subtotal?
- No
Row 5
- Activity group
- Use over the stated service
- Fictional kg CO2e
- 25
- In factory-gate subtotal?
- No
Row 6
- Activity group
- End-of-life treatment
- Fictional kg CO2e
- 5
- In factory-gate subtotal?
- No
Row 7
- Activity group
- Complete lifecycle total
- Fictional kg CO2e
- 100
- In factory-gate subtotal?
- Gate subtotal: 65
The materials-and-assembly numerator is 45 + 15 = 60 kg CO2e. Incoming transport is a separate group in this example, so its 5 kg CO2e belongs in the gate denominator but not that numerator. This is a stated stage convention; a different classification must not be mixed into the same comparison unnoticed.
For the complete lifecycle, the share is (60 kg CO2e / 100 kg CO2e) × 100 = 60%. For the factory-gate subtotal, it is (60 kg CO2e / 65 kg CO2e) × 100 = approximately 92.3%. The units cancel in each ratio. The second denominator excludes distribution, use and end-of-life; it is not a complete final-product inventory or evidence that the product complies with a reporting standard.
The paired ratios show the same numerator against the two stated totals. A gate-only percentage of 92.3% and a lifecycle percentage of 60% are not competing estimates of the same quantity. Neither is a generic benchmark. Their difference is a boundary effect, not an emissions saving.
Two independent rows retain the60kgCO2e material-and-assembly numerator. The first divides it by the65kgCO2e factory-gate subtotal, giving approximately92.3%; the second divides it by the100kgCO2e full-life-cycle total, giving60%. Both denominators are for the same invented product reference flow. No arrow joins the rows or implies a reduction, and the gate result is not a complete final-product inventory.
Diagram text description
Reproduce this calculation with your own inventory only after every stage has been expressed for the same product and service. If the denominator is missing an important stage or is zero or negative, stop rather than present an ordinary positive stage share without resolving the underlying accounting and interpretation.
Use the result as a decision, not a generic benchmark
Use the percentage to locate a question worth investigating, then return to absolute emissions and uncertainty. A large materials share may point towards material demand, process route, yield or supplier data. It does not by itself prove that changing the material is the best intervention; the change could affect durability, function or energy during use.
Extend the fictional desk-light case without changing production. If the assumed use contribution rises from 25 to 75 kg CO2e, the full total rises from 100 to 150 kg CO2e. The unchanged 60 kg CO2e numerator now represents 40%. The production share looks smaller because another contribution became larger. The complete result became worse, not better.
Now imagine reducing the fictional material contribution from 45 to 35 while holding every other stage constant. Materials plus assembly fall to 50 kg CO2e and the lifecycle total falls to 90 kg CO2e. The share is approximately 55.6%, while the absolute reduction is 10 kg CO2e per stated service. A real design change would require checking the held-constant assumptions rather than inheriting them from this arithmetic.
Before issuing a customer-facing percentage, resolve four questions: is the product definition stable, is the denominator complete for its stated purpose, are important data gaps visible, and does the proposed comparison survive plausible changes in assumptions? Keep the absolute stage values and the sensitivity result with the fraction. If one uncertain component determines the decision, the most valuable next step may be obtaining better evidence for that component, not optimising the displayed percentage.
Where product and supplier records fit
Product and supplier records are useful when they connect the physical item to the assumptions behind its footprint. A structured product-data workflow should preserve revision identity, component quantities, supplier evidence and factor coverage together. That makes it possible to see whether a changed result follows from a real design change, better information or a different accounting choice.
Organising those records is not the same as measuring a factory, selecting an appropriate lifecycle method or independently verifying a result. When assessing support for this work, ask which inputs must come from the manufacturer, which factors require specialist selection, and who resolves boundaries and allocation. An organised blank field is still a missing input; software cannot turn it into a defensible manufacturing percentage by itself.
Begin with one defined product and build an explainable numerator and denominator for it. The inventory worksheet, assembly procedure and conditional example provide a practical starting point. The final answer should state what was counted and why its share is useful for the intended decision, rather than offer a universal number that the evidence cannot support.
SKU, BOM & supplier data
