Cardboard and plastic-container bales stand in a synthetic industrial sorting hall with conveyors.
Conceptual sorting scene, not an identified customer facility or evidence of a particular recovery yield.
Diagram text description

Strapped cardboard bales occupy the left of a sorting hall and compressed plastic-container bales the right. Blue conveyors, yellow guardrails and overhead ducting suggest material sorting. There is no readable facility identity, factor, measured emissions result or certification.

A recycling emissions factor is useful only when it describes the activity you are measuring. A value for collecting and sorting discarded material is not automatically a value for producing recycled feedstock. Nor can a factor that includes a displaced-material credit be substituted silently for one used to report gross waste-treatment emissions.

This explains an initially puzzling result: a recycling number can appear higher than a landfill number without establishing that landfill is the better overall option. The two records may count different processes, assign recycling burdens differently or answer different questions. Even a consistent treatment-only comparison does not necessarily represent the material supplied by recovery or the other consequences of the routes.

The task is therefore to identify what each number represents before comparing its size. The worked comparison below holds both waste input and a defined material service in view. Its numbers are deliberately fictional, not recommended factors. It shows how a ranking can change when the question changes, and why that change must not be turned into an unsupported inventory adjustment or a universal environmental claim.

First decide which activity you are accounting for

Classify the record, not the material’s appearance. An outgoing load of plastic from a manufacturing site describes waste management. A delivery of recycled polymer purchased to make the next product describes an input to production. The substance may pass through the same supply chain, but those transactions require different activity quantities and factor boundaries.

Under the GHG Protocol framework, third-party treatment of waste generated in operations belongs to Category 5. Emissions embodied in purchased recycled material belong in the applicable purchased-input accounting, commonly Category 1, with capital goods treated separately where relevant. Waste handled in facilities controlled by the reporting company requires its own Scope 1 and 2 treatment rather than being called outsourced waste merely because recycling occurred.

The branch diagram separates outgoing waste records from purchased recycled-input records. It does not make them mutually exclusive activities for a company: an organisation may generate waste and buy recycled inputs during the same period. Use a separate calculation for each appropriate transaction, then apply the selected accounting method consistently. A waste-collection invoice cannot by itself establish the production footprint of a purchased resin, and a recycled-content certificate does not establish the treatment emissions of an outgoing load.

A record-type decision branches from outgoing discarded site waste to incoming purchased recycled input as two different accounting questions.
Classify each transaction: outgoing waste and incoming recycled input need different boundaries. One company can have both.
Diagram text description

The Record type decision has an Outgoing branch to Discarded site waste and an Incoming branch to Purchased recycled input. These classify the transaction being calculated, not mutually exclusive company types or better and worse treatment options. Applicable inventory categories, ownership and allocation still need the accompanying explanation.

Keep treatment emissions separate from avoided production

Physical processes and allocated inventory emissions are not the same thing. Recovery can require transport, sorting, electricity and further processing. An inventory method may assign some processing emissions to the purchaser of the recovered material rather than to the company discarding it. A small or zero value at the waste-generator boundary therefore need not mean that the recycler used no energy.

Read that allocation before deciding what to add. If upstream recycling processes are already included in the cradle-to-gate factor for a purchased material, adding them again through a second estimate can duplicate the same activity. Conversely, a collection-only figure does not establish that all later processing is covered somewhere in the calculation. The missing information is the allocation and process boundary, not an assumed universal recycling efficiency.

An avoided-production comparison asks a further question: what would happen if recovered material replaced an alternative supply? Its answer needs a credible alternative, usable recovered output and compatible quality. Merely sending a tonne to a recycler does not prove that a tonne of virgin production was displaced.

Keep such comparisons separate from the Scope 1, 2 and 3 inventory. A modelled avoided effect does not cancel the reported emissions of an actual collection or treatment activity. The worked example later adds the material supply needed for a common service; it does not enter an avoided-production credit into a waste ledger.

Match material with the route it actually took

Match the factor to the route that can be supported, rather than the route printed on the bin. A collection contractor might take material directly to a processor, combine it with other loads at a transfer station, or send it to sorting where only part is recovered. These routes can involve different activities and different quantities reaching each destination.

For example, suppose a site records a load as “mixed recyclables”, but the receiving facility sorts paper, metals and plastics and sends contaminants or rejects to another treatment route. Applying a factor for clean, single-material recycling to the whole load would silently assume away that difference. Equally, applying a broad mixed-load factor after the site has reliable material-specific measurements may discard useful information.

Ask what supports each step: a weighed collection record identifies the outgoing load; a receiving or processing record helps establish its destination; a yield or residual record explains what did not become recovered output. These documents answer different questions. They need not all be supplied in one perfect certificate, but an unsupported step should remain visible rather than being upgraded from an intention into a verified result.

Where the final treatment remains uncertain, distinguish the measured mass from the assumed route. A sensitivity estimate or an explicitly uncertain route may be appropriate under the chosen method. An unqualified “recycled” entry is not strengthened by attaching a more precise factor to it.

Read the factor boundary before using the value

A factor title is a starting point, not a complete process description. “Recycling” could refer to collection and sorting, a physical chain extending through reprocessing, or an inventory allocation that assigns some of that chain to recovered material. The following matrix describes illustrative coverage patterns, not three official datasets.

Process or accounting featureCollection/sorting recordPhysical recovery-chain recordAllocated inventory record
Collection and deliveryAs documentedAs documentedCheck method
Sorting at recovery facilityIncluded if statedIncluded in this patternCheck allocation
Reprocessing into usable materialNot establishedIncluded in this patternMay sit with material purchaser
Residual treatmentCheck sourceMust be statedCheck assigned scope
Virgin-material substitutionNot establishedSeparate comparison questionNot a silent inventory deduction

Table 1, shown one row at a time. Every field is retained.

Row 1

Process or accounting feature
Collection and delivery
Collection/sorting record
As documented
Physical recovery-chain record
As documented
Allocated inventory record
Check method

Row 2

Process or accounting feature
Sorting at recovery facility
Collection/sorting record
Included if stated
Physical recovery-chain record
Included in this pattern
Allocated inventory record
Check allocation

Row 3

Process or accounting feature
Reprocessing into usable material
Collection/sorting record
Not established
Physical recovery-chain record
Included in this pattern
Allocated inventory record
May sit with material purchaser

Row 4

Process or accounting feature
Residual treatment
Collection/sorting record
Check source
Physical recovery-chain record
Must be stated
Allocated inventory record
Check assigned scope

Row 5

Process or accounting feature
Virgin-material substitution
Collection/sorting record
Not established
Physical recovery-chain record
Separate comparison question
Allocated inventory record
Not a silent inventory deduction

An unknown cell is not a zero. If the documentation does not establish whether reprocessing is included, neither adding a guessed reprocessing value nor declaring it emission-free resolves the uncertainty. Follow the source through to its methodology or request clarification.

This also explains why two factor records can differ without either being arithmetically wrong. They can describe different stopping points or allocate a process to different inventory participants. The comparison becomes meaningful only after the same activities, quantity basis and reporting purpose have been established. If those cannot be aligned, retain the records as different quantities rather than choosing the lower value.

Check region, dataset and year

Region, reference period and version are part of a factor’s meaning. Electricity supply, landfill practice and recovery technology can differ between locations. A recent foreign factor does not automatically represent the actual facility better than a documented local source, and a familiar publisher’s name does not remove the need to inspect the selected row.

The EPA Emission Factors Hub was consulted on 31 October 2026 (UTC). Its public page distinguishes organisational reporting factors from the WARM scenario tool through linked guidance. The New Zealand materials-and-waste guide likewise identifies a national scope and specific waste-disposal coverage; it is not a generic recycling-factor catalogue for every country. These sources help define the question, not justify transferring a number to an unrelated route.

Keep separate the year of the activity, the underlying data period and the dataset edition. An edition can update a methodology without representing newly measured conditions at your contractor’s plant. Record the gas metric and units as well: a carbon dioxide-only value is not automatically equivalent to a carbon dioxide-equivalent value covering relevant gases. When a version changes, establish what changed and whether a comparison over time requires consistent recalculation. Otherwise a methodological update can be mistaken for operational progress.

Verify mass and units

First identify whether “ton” means a US short ton or a metric tonne. One metric tonne is 1,000 kg; one short ton is approximately 907.185 kg. A factor stated per short ton therefore cannot be multiplied by a mass in metric tonnes without conversion, even though both headings might be shortened to “tons” in a spreadsheet.

For a purely illustrative calculation, suppose the activity is 2 metric tonnes and an invented factor is 90 kg CO2e per short ton. Convert the mass to approximately 2.20462 short tons, then multiply by 90 to obtain approximately 198.4 kg CO2e. Multiplying 2 by 90 would give 180, but the units would not cancel correctly. The invented factor is not taken from a database or recommended for any material.

The denominator can be wrong even after the mass unit is right. A tonne entering sorting is not necessarily a tonne of usable material leaving reprocessing. If a fictional route turns 1 tonne of incoming waste into 0.6 tonne of equivalent polymer, the other 0.4 tonne must have an explained destination or loss basis. A factor per tonne of output cannot simply be applied to the full incoming tonne.

Label measured and estimated quantities separately. Container volume converted to mass through an assumed density is not the same evidence as a weighing ticket. Show the conversion and its uncertainty, rather than retaining extra decimal places that suggest a precision the activity data does not have.

Why recycling can look higher than landfill in a narrow dataset

A narrow factor can make a landfill route look low because it counts a limited set of disposal emissions, while a recycling record includes collection, sorting or further processing. Material properties matter too: plastics do not have the same decomposition behaviour as food waste. That does not establish that disposal has no climate impact or that every plastic follows the same route. The factor’s boundary must explain the apparent result.

Consider an entirely fictional comparison for 1 metric tonne of a specified clean plastic waste stream. Assume the recycling route yields 0.6 tonne of polymer that satisfies exactly the same grade and performance specification as the alternative virgin polymer. Its remaining 0.4 tonne goes to a stated residual-treatment route already included in the assumed recycling total. The landfill route recovers no usable polymer. These are teaching assumptions, not measured yields or evidence about a real facility.

The two invented route values initially appear to favour landfill: 100 kg CO2e for the complete physical recycling chain versus 20 kg CO2e for waste collection and landfilling. Neither number is presented as a Category 5 factor: the recycling chain includes reprocessing burdens that an inventory allocation may assign to purchased material. Both numbers exclude any avoided-production credit.

Now give both alternatives the same two-part service: manage the 1 tonne of waste and supply 0.6 tonne of polymer meeting that fixed specification. Assume, solely for this example, that producing the additional virgin supply requires 200 kg CO2e and that there are no other omitted activities needed to equalise the service.

Compared itemFictional recycling routeFictional landfill route plus material supply
Waste input handled1 metric tonne1 metric tonne
Physical waste-chain emissions100 kg CO2e20 kg CO2e
Usable polymer recovered0.6 tonneNone
Additional virgin polymer neededNone0.6 tonne
Additional supply emissions0 kg CO2e200 kg CO2e
Total for the fixed common service100 kg CO2e220 kg CO2e

Table 2, shown one row at a time. Every field is retained.

Row 1

Compared item
Waste input handled
Fictional recycling route
1 metric tonne
Fictional landfill route plus material supply
1 metric tonne

Row 2

Compared item
Physical waste-chain emissions
Fictional recycling route
100 kg CO2e
Fictional landfill route plus material supply
20 kg CO2e

Row 3

Compared item
Usable polymer recovered
Fictional recycling route
0.6 tonne
Fictional landfill route plus material supply
None

Row 4

Compared item
Additional virgin polymer needed
Fictional recycling route
None
Fictional landfill route plus material supply
0.6 tonne

Row 5

Compared item
Additional supply emissions
Fictional recycling route
0 kg CO2e
Fictional landfill route plus material supply
200 kg CO2e

Row 6

Compared item
Total for the fixed common service
Fictional recycling route
100 kg CO2e
Fictional landfill route plus material supply
220 kg CO2e

For waste handling alone, the displayed ordering is 20 < 100. For the stated common service, it becomes 100 < 20 + 200 = 220. The apparent ranking reverses because the comparison now includes material supply, not because a negative factor erased the recycling emissions. The common-service difference is 120 kg CO2e in this fictional scenario; it is not a verified avoided-emissions claim or an adjustment to a corporate inventory.

The reversal depends on the assumptions. If the additional virgin supply were instead an invented 50 kg CO2e, the landfill-plus-supply total would be 70 and the ordering would change again. If recovered polymer cannot meet the same specification or genuinely replace the assumed alternative supply, the comparison also needs revision. Real comparisons require applicable data, consistent allocation and justified substitution, not these invented values. Neither this arithmetic nor a treatment-only factor chooses a whole-system environmental winner; other impacts and waste-management obligations remain outside the example.

Do not substitute a waste factor for a product LCA factor

A product-footprint input needs the emissions associated with supplying a defined material or component. A waste-treatment factor answers a different question about an outgoing stream. The fact that both mention recycling does not bridge the gap between collecting discarded plastic and supplying a kilogram of usable recycled resin at the required quality.

Imagine purchasing pellets made from a recovered stream. The product-input dataset needs a stated boundary through the processes that supply those pellets, with the chosen recycling allocation, yield and any further processing. A collection-and-sorting factor cannot stand in for those activities simply because the original waste contained the same polymer. Nor does the recycled-content percentage alone reveal the energy or other inputs required to make the pellets usable.

The functional relationship is also different. A waste factor may use incoming mass; the material dataset may use marketable output. Purification, drying, blending or other actual processing can change both the emissions and the output quantity. Reconcile the two records only where the selected method establishes how the processes are assigned. Do not force agreement by copying a waste value into the BOM. The relevant question is whether the material-input result represents what the buyer actually receives, rather than whether its factor is smaller than a disposal number.

Ask a recycling provider for auditable facility data

A facility-specific value can improve a calculation when its basis is visible. It is not automatically more reliable than a secondary factor merely because it came from the contractor. Ask whether the figure is a measured process total, an allocation to your stream or a factor obtained by dividing a total by a particular quantity.

  1. Identify the facility, actual processes and operating period behind the result, including whether the site only sorts or also reprocesses the material.
  2. Establish which emissions and activities are included, which are assigned elsewhere, and whether transport and residual treatment are covered.
  3. Ask how shared facility activity is allocated to the relevant material stream and whether the allocation has a justified physical or other method basis.
  4. Match the denominator to incoming waste or usable output, identify measured versus estimated mass, and reconcile rejects or other losses.
  5. Obtain a reproducible source reference and uncertainty statement, not just a final number or an assurance label without a defined scope.

For example, a fictional allocated process result of 500 kg CO2e associated with 5 tonnes of compatible incoming material gives 100 kg CO2e per input tonne. It does not establish a per-output-tonne factor unless the recovered-output quantity is also known. If the 500 kg is instead the total for a mixed facility, dividing it by your 5 tonnes without allocating the other streams would assign their activity to you.

Build a factor-selection record

A factor-selection record should explain a decision already made, not conceal an unresolved boundary behind a completed-looking row. The useful record is compact enough to revisit when the material, route or dataset changes. It should point to evidence that another person can retrieve without reconstructing a conversation.

  • Identify the activity and reporting purpose: outgoing waste, purchased input or a separately named scenario comparison.
  • Preserve the material description, actual route, facility or justified geography, activity period and measured or estimated quantity basis.
  • Record the factor publisher, dataset, row identifier, edition, units and the source document or provider reference.
  • Summarise included processes, excluded or allocated processes, residual treatment, any credit treatment and genuinely unknown coverage.
  • Retain the unit conversion, calculation, uncertainty and reason for selection; distinguish the person responsible for the choice from any independent assurance engagement.

For the fictional comparison above, the record would say explicitly that the 100 and 20 kg CO2e figures are invented physical-route totals, not approved inventory factors, and that the additional 200 concerns a separate common-service scenario. A real working record would instead link the actual factors to their methods and source evidence.

Revisit the selection when the route, output quality, yield, facility practice or applicable dataset changes. A new edition alone is not proof that a reported reduction occurred; a changed destination is not a minor administrative detail. The record’s value is making those changes visible before a convenient number becomes a repeated assumption.

What product and supplier records can establish

Product and supplier information can help connect an incoming material to its identity, composition and source records. That is useful context for recycled-content and product-footprint work, but it does not by itself establish the destination of outgoing waste, the recovery yield or a facility’s process emissions. Those need their own evidence and compatible accounting boundaries.

When evaluating a data workflow, separate what it organises from what it measures or verifies. A system should not be assumed to contain an approved recycling-factor engine, a live materials-recovery feed or a universal treatment factor merely because it stores a SKU or bill of materials. Ask which source records and methodological decisions still need to be supplied, and who is accountable for them.

Begin with one material stream and name the question its factor must answer. Align process coverage and units before calculating. If a recycling number appears to lose against landfill, explain the differing boundaries and, where appropriate, build a separately justified common-service comparison. A defensible answer is one whose scope can be explained, not simply the lowest number available.