How to choose a landfill emission factor for a waste stream
A person studies a clipboard beside a monitor with an abstract dashboard. Industrial buildings and basins are visible through the window.
Diagram text description
A landfill emission factor estimates greenhouse gas emissions per unit of a specified waste stream sent to landfill under a defined method. To use it, match the waste type, disposal route, geography, reporting period and mass unit. Check which gases and activities the factor includes, and the time over which treatment emissions are attributed to the waste.
A factor for mixed municipal waste can carry very different assumptions from a factor for segregated paper. Two factors with the same mass denominator may also treat collection transport, landfill equipment or gas recovery differently. Start with the weighbridge or contractor record, identify where the material actually went and then inspect the factor’s source notes.
The fictional example in this guide follows one cardboard disposal record through factor selection. It shows why an archived mixed-waste value fails even if its units can be converted. The audit template gives the next reviewer the source, boundary and unresolved items needed to decide whether an estimate can be used.
Identify the reporting boundary and who operates the waste facility
Start with the reporting company and its organisational boundary. GHG Protocol Scope 3 Category 5 covers relevant third-party treatment of waste generated in the company’s operations. If the company owns or controls a landfill within its reporting boundary, classify the facility’s direct emissions and purchased energy under the applicable Scope 1 and Scope 2 rules. The same treatment activity can sit in a different scope for the waste generator and the facility operator.
| Reporting situation | What to establish |
|---|---|
| Company sends operational waste to a third-party landfill | The company’s waste amount, material, actual route and attribution under Category 5 |
| Company operates a landfill within its own boundary | The facility’s direct releases and purchased energy, with their appropriate scope treatment |
| Company estimates treatment of sold products at end of life | The separate product or corporate category boundary and the evidence for the disposal route |
Table 1, shown one row at a time. Every field is retained.
Row 1
- Reporting situation
- Company sends operational waste to a third-party landfill
- What to establish
- The company’s waste amount, material, actual route and attribution under Category 5
Row 2
- Reporting situation
- Company operates a landfill within its own boundary
- What to establish
- The facility’s direct releases and purchased energy, with their appropriate scope treatment
Row 3
- Reporting situation
- Company estimates treatment of sold products at end of life
- What to establish
- The separate product or corporate category boundary and the evidence for the disposal route
Read the contract and disposal confirmation together. A hauler may transfer waste to another operator or to a sorting facility first. A collection invoice establishes that something was collected. A disposal record shows where it went and, where relevant, how much reached the landfill.
Define the reporting period for the waste and keep it distinct from the period of the emissions model. If a factor attributes later methane emissions to waste generated this year, keep that convention visible so another reviewer can interpret the result.
Choose the factor method from the activity data you actually have
Ask what the contractor can establish before choosing a calculation method. GHG Protocol Category 5 guidance describes supplier-specific, waste-type-specific and average-data approaches. The most specific evidence is useful only if it represents the company’s actual waste and the method being reported.
| Method | Evidence needed | What to check |
|---|---|---|
| Supplier-specific | Waste treatment emissions or an attributed result from the provider | Coverage, allocation to your waste, period, facility and treatment stages |
| Waste-type-specific | Mass by material and actual treatment route, with suitable factors | Whether the material and route classifications match the dataset and contractor evidence |
| Average data | A defensible total mass and documented average treatment assumptions | Which composition or routes are estimated and whether the method fits the intended use |
Table 2, shown one row at a time. Every field is retained.
Row 1
- Method
- Supplier-specific
- Evidence needed
- Waste treatment emissions or an attributed result from the provider
- What to check
- Coverage, allocation to your waste, period, facility and treatment stages
Row 2
- Method
- Waste-type-specific
- Evidence needed
- Mass by material and actual treatment route, with suitable factors
- What to check
- Whether the material and route classifications match the dataset and contractor evidence
Row 3
- Method
- Average data
- Evidence needed
- A defensible total mass and documented average treatment assumptions
- What to check
- Which composition or routes are estimated and whether the method fits the intended use
A contractor’s site-wide annual methane number needs a defensible basis for attributing emissions to your waste. Request the method and any allocation before using it. Where the contractor can confirm mass and treatment but has no attributed result, look for a suitable material and route factor.
If the available records do not show where the waste went, mark the gap and use a documented average only if the reporting approach permits it. Keep the estimate separate from values backed by a confirmed route. Explain what would replace it, such as a disposal ticket or a breakdown by treatment stream.
Match the waste type, disposal route and facility conditions
Record what was disposed of and what conditions the selected method represents. Organic material can decompose and generate methane. Its composition, moisture and landfill conditions affect how much forms and how quickly. Some methane is recovered or oxidised before release. These effects vary by site, timing and method, so read the assumptions behind an average.
| Waste or site feature | What to check |
|---|---|
| Food and other readily degradable material | Composition and the treatment and decay assumptions the factor represents |
| Paper and cardboard | Material classification, contamination and the basis of the waste mass |
| Mixed residual waste | Which materials the mix assumes and how close it is to the measured stream |
| Plastic or metal | Whether the factor covers disposal operations and how it treats material that contributes little to biological methane generation |
| Landfill gas and cover | What the factor assumes about capture, treatment and oxidation before emission |
Table 3, shown one row at a time. Every field is retained.
Row 1
- Waste or site feature
- Food and other readily degradable material
- What to check
- Composition and the treatment and decay assumptions the factor represents
Row 2
- Waste or site feature
- Paper and cardboard
- What to check
- Material classification, contamination and the basis of the waste mass
Row 3
- Waste or site feature
- Mixed residual waste
- What to check
- Which materials the mix assumes and how close it is to the measured stream
Row 4
- Waste or site feature
- Plastic or metal
- What to check
- Whether the factor covers disposal operations and how it treats material that contributes little to biological methane generation
Row 5
- Waste or site feature
- Landfill gas and cover
- What to check
- What the factor assumes about capture, treatment and oxidation before emission
A factor can include emissions from operating the landfill even for materials with low methane generation. It may leave upstream manufacturing outside its boundary. Keep the material’s production footprint separate from the waste treatment estimate unless the study explicitly includes both and reconciles them.
For a site-specific claim, obtain site and waste evidence for the method. A national or regional default can support an estimate in a matching context, with its limitations disclosed. It cannot establish the gas capture performance of an individual site.
Check factor source, year, geography and current version
Go back to the publisher and the exact release. Record the workbook or report, table or row, source geography, data year, release and any revision notes. A reporting year describes when your waste was generated. The factor’s data year describes the evidence it represents. The publication date tells you when the dataset was issued. Keep all three where they differ.
For example, a listing for a 2023 value marked deprecated or replaced belongs in the historical record. Follow the publisher’s replacement and compare its scope and assumptions before using it. A copied search snippet can omit material, treatment, geography and version, even when it shows the number and unit.
The UK government’s 2026 conversion-factor publication and methodology explain where to find waste disposal factors and how the dataset approaches waste routes. Use the actual table and notes to select a value for an applicable case. EPA’s factor publication uses its own definitions and assumptions. Neither a landing page nor a year label identifies the right row by itself.
Keep the original factor when reproducing a historical estimate. If you revise the calculation with a different source, record the reason and whether the difference reflects changed waste activity, new evidence or a method change.
Match the mass unit to the factor denominator
Check the mass unit on both the ticket and the factor. A metric tonne is 1,000 kilograms. A US short ton is 2,000 pounds, or 907.18474 kilograms. EPA’s waste-factor table uses short tons for its denominator. A mass recorded in metric tonnes cannot be used directly with that denominator.
Suppose a fictional weighbridge record shows 2,400 kilograms. For a factor per metric tonne, divide by 1,000 to get 2.40 tonnes. If the source instead calls for US short tons, divide 2,400 by 907.18474 to get about 2.646 short tons. Preserve the unrounded result for a calculation and label the unit in the estimate. Neither conversion resolves a mismatch in waste material or geography.
A fictional ticket gives 2,400 kilograms. Divide by 1,000 for 2.40 metric tonnes. Divide by 907.18474 for about 2.646 US short tons. Use the relevant conversion and preserve the unrounded amount in the calculation.
Diagram text description
Check the numerator separately. A factor in metric tonnes of carbon dioxide equivalent, or CO₂e, produces tonnes of CO₂e when multiplied by the matching waste activity. Convert to kilograms of CO₂e only if the reporting unit requires it. A value reported as mass of methane would need the required climate conversion before being combined with other greenhouse gases.
Record gross and tare weights or the contractor’s net amount, the waste classification and whether the mass is as received or on another basis. Reconcile that basis with the selected factor before multiplication.
Read the boundary notes before adding transport or avoided emissions
Inspect the source boundary before adding transport, equipment or a gas recovery estimate. EPA’s 2025 waste table notes that its landfill factors include assumed transport to the landfill, equipment use and landfill methane. The notes exclude avoided emissions associated with energy recovery and landfill carbon storage. Those statements apply to that publication’s factors. Other sources can define their boundary differently.
| Boundary item | What to do |
|---|---|
| Collection and transport | Check whether the chosen factor includes transport and which movement it represents before adding a separate leg |
| Landfill equipment and treatment | Keep the included processes with the selected row and ask about any exclusions |
| Gas recovery or avoided emissions | Read the method’s treatment of recovery and keep avoided effects outside the inventory total where the reporting approach requires separate reporting |
Table 4, shown one row at a time. Every field is retained.
Row 1
- Boundary item
- Collection and transport
- What to do
- Check whether the chosen factor includes transport and which movement it represents before adding a separate leg
Row 2
- Boundary item
- Landfill equipment and treatment
- What to do
- Keep the included processes with the selected row and ask about any exclusions
Row 3
- Boundary item
- Gas recovery or avoided emissions
- What to do
- Read the method’s treatment of recovery and keep avoided effects outside the inventory total where the reporting approach requires separate reporting
EPA provides separate guidance for using its inventory factors and its Waste Reduction Model, or WARM, which can be used to compare management scenarios. A scenario difference or avoided impact answers a different question from the treatment emissions attributed to a waste stream. Keep the baseline and boundaries explicit if you present a scenario analysis.
If the source is unclear about transport, ask for its calculation notes. Until you know the coverage, hold the overlapping line or report a clearly bounded subtotal. Do the same when a contractor reports a combined collection and treatment figure.
Separate landfill methane modelling from company waste accounting
A national greenhouse gas inventory asks how much methane solid waste disposal sites emit during a period. The IPCC first-order decay method estimates methane generated over time from waste deposited in different years. Depending on the model inputs, it accounts for methane recovery and oxidation when estimating emissions. Waste deposited in earlier years can contribute to the current year’s result.
A company waste estimate can ask which treatment emissions the reporting method attributes to the waste the company generated during the reporting year. Under Category 5 guidance this can include future emissions resulting from that waste. The diagram contrasts the two questions. A national or facility annual total cannot simply be divided by current-year waste and applied to a company stream without a defensible method.
The left view groups waste from several years as contributors to methane emitted in the reporting year. The right view starts with waste deposited in the selected year and follows the treatment emissions attributed to that cohort across years. No emission rate or decay curve is shown.
Diagram text description
If an operator supplies a facility result, request how it was calculated and how the share was assigned. Check whether the figure measures the reporting period’s emissions, models emissions attributable to a specified waste cohort, or does something else. Then check the material and time boundary against the company’s accounting method.
Keep the landfill model assumptions and the company’s activity records separately identifiable. The reviewer should be able to see why a factor applies to the disposal quantity and why its emissions may occur over a different period.
Choose a factor for a fictional cardboard disposal record
Consider this fictional example. Alder Bindery generates segregated corrugated cardboard waste in England during its 2026 reporting year. A contractor’s weighbridge ticket shows 2,400 kilograms as received. A separate disposal ticket confirms landfill rather than recycling. The business uses third-party treatment and wants an internal Category 5 estimate. All company, facility and factor-record identifiers are invented.
| Review field | Filled entry |
|---|---|
| Activity and route | Ticket W-62 records 2,400 kg of segregated corrugated cardboard. Disposal record D-62 confirms third-party landfill |
| Candidate selected | Fictional operator report LP-26 rev 2, row Card-LF. It describes cardboard at the receiving site in kg CO₂e per metric tonne as received |
| Method and boundary | The row attributes modelled landfill treatment over the method’s stated horizon to the waste received. It includes landfill equipment and treatment methane. Collection and avoided effects are excluded |
| Alternative rejected | An archived fictional 2023 US mixed-waste row uses short tons and a different composition, geography and gas assumptions. Unit conversion would leave those mismatches unresolved |
| Decision and open evidence | Select the operator row for the treatment estimate. Convert 2,400 kg to 2.40 metric tonnes. Procurement requests separate collection evidence and keeps that part unresolved |
Table 5, shown one row at a time. Every field is retained.
Row 1
- Review field
- Activity and route
- Filled entry
- Ticket W-62 records 2,400 kg of segregated corrugated cardboard. Disposal record D-62 confirms third-party landfill
Row 2
- Review field
- Candidate selected
- Filled entry
- Fictional operator report LP-26 rev 2, row Card-LF. It describes cardboard at the receiving site in kg CO₂e per metric tonne as received
Row 3
- Review field
- Method and boundary
- Filled entry
- The row attributes modelled landfill treatment over the method’s stated horizon to the waste received. It includes landfill equipment and treatment methane. Collection and avoided effects are excluded
Row 4
- Review field
- Alternative rejected
- Filled entry
- An archived fictional 2023 US mixed-waste row uses short tons and a different composition, geography and gas assumptions. Unit conversion would leave those mismatches unresolved
Row 5
- Review field
- Decision and open evidence
- Filled entry
- Select the operator row for the treatment estimate. Convert 2,400 kg to 2.40 metric tonnes. Procurement requests separate collection evidence and keeps that part unresolved
Ticket W-62 establishes the mass. Disposal record D-62 confirms landfill. Operator report LP-26 revision 2 provides the Card-LF factor row for the site and material. The adjacent table records why the archived alternative is unsuitable and why collection remains open.
Diagram text description
The reviewer uses the matching row for the treatment component because it covers the material, site, period and mass basis. This example records the factor choice without supplying a numerical factor or a treatment total. If the underlying operator report does not substantiate the method or its applicability in an actual case, hold the selection and record the gap.
Keep W-62, D-62, the selected report and the rejected alternative with the decision. Reopen it if the route changes or the operator revises the assumptions. Collection remains a separate item if it is within the reporting boundary.
The audit record to keep with every landfill estimate
Use the same audit fields for each waste stream or treatment route. If one contractor line covers several materials, split it only where the evidence supports the split. Preserve the original record and show which parts remain estimated.
| Audit field | What to record |
|---|---|
| Activity and period | Waste stream, origin, reporting period, source ticket and original measured amount |
| Disposal route and evidence | Contractor, receiving facility or route confirmation, and unresolved classification |
| Units and conversion | Original mass unit and basis, factor denominator, conversion and output unit |
| Factor and provenance | Publisher, exact file and row, release, data year, geography and version |
| Boundary and assumptions | Included treatment, transport, equipment, energy recovery treatment and time boundary |
| Estimate and limitations | Calculation reference, result, permitted use, unresolved evidence and any proxy |
| Owner and refresh trigger | Reviewer, responsible owner, decision date, next action and reason to recalculate |
Table 6, shown one row at a time. Every field is retained.
Row 1
- Audit field
- Activity and period
- What to record
- Waste stream, origin, reporting period, source ticket and original measured amount
Row 2
- Audit field
- Disposal route and evidence
- What to record
- Contractor, receiving facility or route confirmation, and unresolved classification
Row 3
- Audit field
- Units and conversion
- What to record
- Original mass unit and basis, factor denominator, conversion and output unit
Row 4
- Audit field
- Factor and provenance
- What to record
- Publisher, exact file and row, release, data year, geography and version
Row 5
- Audit field
- Boundary and assumptions
- What to record
- Included treatment, transport, equipment, energy recovery treatment and time boundary
Row 6
- Audit field
- Estimate and limitations
- What to record
- Calculation reference, result, permitted use, unresolved evidence and any proxy
Row 7
- Audit field
- Owner and refresh trigger
- What to record
- Reviewer, responsible owner, decision date, next action and reason to recalculate
Ask the reviewer to trace one row from the disposal ticket through the converted mass to the exact factor and its notes. Check that a separate transport row does not repeat an included service. If the selected factor changes, keep the previous result and state whether the revision affects a published or internal period.
For the fictional cardboard example, the open item is collection evidence. Keep it visible until the responsible owner can confirm which activity should be estimated and whether it belongs in the reporting boundary.
Connect the estimate to the waste records
Connect the waste estimate to the records that describe how the material arose. Where the waste comes from manufacturing or packing, keep the product revision, material description and site with the waste record when those details help identify the stream. A bill of materials can explain which material was used. The disposal ticket and contractor records establish which quantity reached the treatment route.
Choose one material stream to review first. Obtain its measured mass and route, identify the intended reporting boundary and record why the factor fits. Give any unresolved question to the person who can obtain the relevant evidence. For Alder Bindery, that means getting the collection record and deciding whether the transport belongs in the estimate. When the contractor changes the route or the publisher updates the factor, revisit the estimate and preserve the earlier decision.
Waste & wastewater
